Product Description:
Chroma6310A series programmable DC electronic load is mainly used in multi-channel or single-channel output AC/DC power supply, multi-channel or single-channel DC/DC output converter, charger and power supply electronic components performance test, to provide engineers in the design and development, production line testing and quality assurance product inspection operations on the fast and effective test solution. 6310A series adopts modular design, users can choose different load power modules into the system host frame, through the front control board keyboard, RS232, USB and GPIB standard connected to ☐ to control.
The 6310A series electronic load currently offers 12 load modules with power ranging from 20W to 1200W. Current up to 240A; Voltage measurements are available from 0.5mV to 600V. Each module adopts an isolated and ground float connection mode to avoid short circuit, each load module has a two-stage current and voltage measurement file, the master/slave interface design can synchronize the application of multiple electronic load modules, the specific load can be operated in a fixed current, a fixed voltage, a fixed power and a fixed resistance mode.
6310A series can simulate a variety of dynamic load states, users by editing load voltage, load current, load rise/fall rate, current level, duration and other parameters to edit the load waveform, test parameters and state storage function of up to 100 groups, the system can be based on automatic test requirements, Call H out of the EEPROM in the instrument at any time.
Each load module in the 6310A series is equipped with a multi-stage 16-bt high-precision piezoelectric flow measurement line, which allows users to measure and adjust online voltage or simulate short circuit testing through the easy-to-operate keyboard on the front control board. In addition, the 6310A series is also designed with optional remote controls for automated production lines.
6310A series has a self-diagnosis system design, can maintain the daily use of the instrument, 6310A series also has over power, over current, over temperature protection and over voltage, positive and negative electrode reverse alarm function, can greatly improve the reliability of the product is the engineering test and automatic test system integration to be trusted products.
Features:
-
The maximum power: 200 w, 100 w x 2 (two-way), 30 w8250w, 300 w, 350 w, 600 w, 1200 w
-
Voltage operating range: 0~600V
-
Highly compatible with the 6310
-
The same frame can be up to 8 channels, suitable for multi-output switching power supply test
-
Load modules up to 1200W meet the requirements of high-current, high-power applications
-
Simultaneous execution of multiple electronic load module applications
-
Constant current, constant resistance, constant voltage and constant power operation mode
-
Dynamic load operating frequency up to 20kHz
-
The change rate of the high-speed load current ranges from 0.32MA/μs to 10A/μs
-
Low input impedance, high current pulling capability at low voltage
-
It can simulate the instantaneous response of power load and measure the output in real time
-
Users can edit 100 sets of test parameters and status stores through the front panel
-
Automatically determine whether the test result exceeds the set specification according to the set specification high/low limit of the test parameter
-
Digital /O control
-
Multi-stage 16-bit high-precision voltage and current measurement circuit
-
Over current (OCP) test function
-
Remote test function
-
Short-circuit test
-
Power-on self-detection function
-
Protection functions: overpower, overcurrent, and overtemperature protection, overvoltage, and positive and negative polarity reverse alarm
-
RS-232, USB(optional), GPIB(optional) control interface