Product Description:
Chroma 61603 Programmable AC Power supply is a basic economical AC/DC power family products, through simple programming actions to output accurate and pure AC/DC waveform.
On the functional side, Chroma 61603 can output less than 0.3% AC harmonic distortion at full load (50/60Hz, linear load). The built-in power factor improvement circuit (PFCS) enables it to have higher efficiency and greater power output, and the input power factor can reach more than 0.98 at full load; In addition, the digital signal processing (DSP) technology used in Chroma 61603 provides accurate and fast Power parameters such as voltage root mean square (Vrms), current root mean square (Irms), true power (Ture Power), frequency (Hz), power factor (PF) and current crest (CF).
Chroma 61603 AC power supply has 4~6 times the peak current tolerance through high order pulse width modulation (PWM) technology; Chroma 61603 also provides an external input analog port through which signals can be received from any waveform generator and amplified to simulate and reproduce unique waveforms observed in the field.
In terms of power, Chroma 61603 can achieve a higher power level through and in conjunction with the same series of machines, providing a high power test solution up to 90kVA. And through the machine self-diagnostic test, as well as perfect protection functions such as over power (OP), over current (OC), over voltage (OV) and over temperature (OT) protection, to ensure its quality and reliability.
Features:
-
Output characteristics: 0-300V/15-1KHz/1.5kVA, 1ø
-
Single-phase or three-phase AC output is available
-
Variable output rate of configurable voltage and frequency
-
Output limits of voltage and current can be set
-
With AC (AC), DC (DC), AC+DC (AC+DC) output mode
-
A wide range of reference measurement functions
-
Single key call mode, quickly set output voltage and frequency
-
High output peak current is suitable for surge current testing
-
Built in power factor correction circuit (PFC) to provide input power factor of 0.98 + at full load
-
It can be input by external analog signal and used as power amplifier
-
Waveform start and end phase Angle control
-
It can be controlled by GPIB, RS232, USB and Ethernet interfaces