浏览次数：401
| 选件 | 是否计量 | 发货周期 | 保修时间 | 成色 |
|---|---|---|---|---|
| 否 | 1天 | - | 9成新 | |
| 所在地 | 机身号 | 状态 | 资料下载 | |
| 深圳市 | 完好 |
产品概述:
Chroma 61503可编程交流电源供应器，树立了业界高性能AC电源产品的新标准，此产品可提供强大的使用功能，如电网干扰模拟，可编程输出阻抗，全方位的测量功能，合成波形与IEC标准测试软件。因拥有以上特点使得61503适合应用于一般商业产品，电力电子，航空电子设备，军事与IEC标准测试的开发和运用，并且从实验桌上测试到大量生产单位皆可适用。Chroma 61503不仅提供纯交流电压应用，AC+DC模式还扩展功能提供直流偏移电压的应用。Chroma 61503运用先进的数字讯号处理技术(DSP)，能够提供高精度和瞬时电压波形测量，如电压均方根值，电流均方根值，实功率，功率因子，电流波峰因子以及量测多达40次的电流谐波成份。61500系列提供用户组合不同谐波成份的功能，为合成谐波失真波的形状。另外还提供了一个可输入外部模拟信号端口，可从任意信号产生器产生仿真信号，并将此信号放大以模仿实际观察到的波形。经由多功能的可编程波形设定和使用方便的操作软件，61500系列交流电源供应器让使用者能够完成符合IEC 61000-4-11/-4-13/-4-14/-4-28的标准抗扰度测试。低阻抗和低电压的谐波特性使得 61505成为符合IEC 61000-3-2标准的最佳选择。另外可程序化的输出阻抗，如再搭配闪烁量测仪器，便可做IEC61000-3-3的标准测试。
产品特色:
可选择单相或三相交流输出
可设定电压和频率的输出变动率
可设定电压和电流的输出限制
高电流波峰因素，适用于浪涌电流测试
可设定电压波形启动及关闭的相位角
输出电压变化的同步TTL信号
LIST、STEP、PULSE模式做测试电源扰动(PLD)模拟
电压暂降、短时中断和电压变化模拟
谐波和间谐波的失真波形合成
参数量测功能包括个阶电流谐波成份
可程式化类比介面
数位介面:GPIB、RS-232、USB和Ethernet
透过并联输出模式可提供更高的输出功率
可编程输出阻抗
Product Overview:
The Chroma 61503 programmable AC power supply sets a new standard in the industry for high-performance AC power products, offering powerful usage features such as grid interference simulation, programmable output impedance, full range of measurement capabilities, synthetic waveforms and IEC standard test software. The above characteristics make the 61503 suitable for the development and application of general commercial products, power electronics, avionics, military and IEC standard testing, and can be applied from laboratory table testing to mass production units. The Chroma 61503 not only provides pure AC voltage applications, but also extends the AC+DC mode function to provide DC offset voltage applications. Chroma 61503 uses advanced digital signal processing (DSP) technology to provide high precision and instantaneous voltage waveform measurements such as voltage RMS, current RMS, real power, power factor, current crest factor and up to 40 current harmonic components. The 61500 series provides users with the ability to combine different harmonic components to synthesize harmonic distortion wave shapes. An input external analog signal port is also provided to generate an analog signal from any signal generator and amplify this signal to mimic the actual observed waveform. With versatile programmable waveform Settings and easy-to-use operating software, the 61500 Series AC power supply enables users to perform standard immunity tests in accordance with IEC 61000-4-11/-4-13/-4-14/-4-28. The harmonic characteristics of low impedance and low voltage make the 61505 the best choice for compliance with IEC 61000-3-2 standards. In addition, the output impedance can be programmed, if combined with the scintillation measuring instrument, you can do IEC61000-3-3 standard test.
Product features:
Single phase or three phase AC output is available
Output variation rate of voltage and frequency can be set
Output limits of voltage and current can be set
High current crest factor, suitable for inrush current testing
The phase Angle of voltage waveform starting and closing can be set
Synchronous TTL signal with output voltage change
Test power supply disturbance (PLD) simulation was performed in LIST, STEP and PULSE modes
Simulation of voltage dips, short interruptions and voltage variations
Synthesis of distorted waveforms of harmonics and interharmonics
The parametric measurement function includes a harmonic component of the order current
Programmable analog interface
Digital interfaces :GPIB, RS-232, USB and Ethernet
Higher output power is provided through parallel output mode
Programmable output impedance
Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有 [粤ICP备14101712号-1] [法律顾问]
公司地址：广东省深圳市南山区西丽街道官龙村华纵科技楼5楼 邮编：518055
