Product introduction:
The Chroma 6560 programmable AC power supply provides power electronics engineers with the ability to simulate various AC power supply states, power waveform distortion, and power characteristics measurement and analysis. This product provides a correct and effective test scheme to simulate various normal or abnormal power supply phenomena, at the same time to measure and analyze, as an integrated power supply test and analysis equipment, fully suitable for research and development characteristics analysis, production testing, quality assurance inspection or automation system integration application.
The Chroma 6560 programmable AC power supply provides programmable setting capabilities for voltages 0-500V and frequencies 45-1000Hz. It has a wide range of applications. In addition to general commercial (47-63Hz) applications, it can also be used for aerospace or military applications (400Hz). The low frequency output characteristic can also be applied to the test of low frequency motor or air conditioning compressor. The output is very pure sinusoidal waveform, generally can maintain the distortion rate below 0.5%.
In order to meet the needs of engineers to simulate abnormal power supply, the Chroma 6560 programmable AC power supply has built in the direct digital frequency synthesis (DDS) waveform generator, which provides highly elastic waveform simulation function. For example, some distortion waveform can be set to test the object under test, such as clamping sinusoidal wave distortion rate from 0% to 43% or amplitude from 0% to 99.9%. Engineers can directly set the required power waveform through the panel key, and can use the large LCD flat display for waveform preview or current waveform monitoring after output, can simulate such as sine wave, square wave and truncated sine waveform, but also simulate the power transient break, surge, noise, phase Angle, voltage and frequency slow rise and fall characteristics. In addition, the Chroma 6560 programmable AC power supply has built in 30 groups of harmonic waveform database, enabling engineers to test the adaptability of power electronics to harmonic power environments.
Chroma 6560 programmable AC power supply with high precision voltage, current, peak current, power, frequency, peak coefficient, power factor, surge current, apparent power (VA), virtual power (VAR), and other measuring functions, so that engineers do not need to rely on other testing equipment for design, testing and analysis. Can easily complete any difficult test work. It can also be used with power analyzer to test IEC 61000-3-2 harmonic current limit and IEC 61000-3-3 flicker.
Chroma 6560 programmable AC power supply provides a simple front panel operation interface and analog signal control and GPIB, RS-232 and other standard interface, easy integration in various automatic test equipment, the product itself has the self-diagnosis program design and over current, over power, over temperature protection circuit, so that the product even under adverse operating environment, Still can safely play its functional characteristics. Under the strict requirement that power electronics should be able to adapt to the increasingly poor power environment, the launch of the Chroma 6560 programmable AC power supply provides effective assistance to design, production, inspection and testing engineers, and also makes excellent guarantee for the quality of products.
Features:
-
Chroma 6560 Output power: 6000VA
-
Voltage specification: 0-150V / 0-300V (parallel), 0-300V/0-500V (series)
-
A built-in waveform generator for direct digital frequency synthesis (DDS)
-
Programmable Sine wave, square wave and clamped sine waveform (Clipped Sine) output
-
Programmable voltage, frequency, phase, current limit and distortion simulation functions
-
The ability to simulate the distortion of mains waveform
-
Built in 30 groups of harmonic waveform database
-
Users can edit harmonic voltage waveform
-
User programmable automatic sequential output voltage waveform
-
High precision voltage, current, peak current, power, frequency, peak coefficient, power factor, surge current, apparent power (VA), virtual power (VAR) and other measuring functions
-
Power factor correction circuit, increase the input power factor to above 0.98, in line with IEC specifications
-
The use of advanced pulse width modulation (PWM) technology, so that this series of machines small size, light weight
-
Built - in output electromagnetic switch for real isolation
-
User default voltage, frequency combination single key control output
-
TTL signal is generated when the output changes, providing automatic test system
-
Remote analog signal control interface (optional)
-
GPIB and RS-232 are optional
-
The LIST mode is used for the simulation of transient voltage changes and changes, and the pre-test of IEC 61000-4-11 is applied
-
Easy to use computer graphical operation interface Softpanel(optional)
服务热线：0755－86016691 电话：13715327187 传真：0755-86641139-816
