Product Description:
The R&S®ENV216 two-wire V-shaped network meets the requirements of the V-shaped network in CISPR 16-1-2 and EN 55016-1-2. In the frequency range of 9 kHz to 30 MHz, the analog impedance is (50 μH + 5 Ω). ) || 50 Ω; and meet the relevant requirements of ANSI C63.4, the frequency range is 150 kHz to 30 MHz. Provide a female connector with ground protection contacts to connect to the EUT. A variety of models that comply with country/region-specific coupling systems are available.
Features：
-
Frequency range from 9 kHz to 30 MHz
-
Power handling capacity up to 16 A, constant current (varies by country/region)
-
Analog impedance (50 μH + 5 Ω) || 50 Ω, in line with CISPR 16-1-2 Amd. 2:2006
-
V-shaped network compliant with CISPR, EN, VDE, ANSI, FCC Part 15 and MIL-STD-461D, E, and F
-
Calibrated according to CISPR 16-1-2
advantage：
Hollow core design and analog hand
The R&S®ENV216 two-wire V-shaped network is based on an air-core inductor and contains an analog hand.
Selectable switchable 150 kHz high-pass filter
To prevent the measurement receiver from being overloaded by the high-level low-frequency spectrum, a 150 kHz high-pass filter can be inserted.
Built-in 10 dB attenuator
To ensure standard impedance (regardless of receiver input attenuation), the R&S®ENV216 is equipped with a 10 dB attenuator.
Built-in pulse limiter (can be turned off)
The built-in pulse limiter (can be turned off) can protect the receiver input.
Remote control TTL level (compatible with Rohde & Schwarz measurement receivers)
The TTL control input is driven by the controller and the Rohde & Schwarz measurement receiver, and can be used for remote control in the automatic test system (phase selection and activation of the high-pass filter). The optocoupler can prevent external interference.
服务热线：0755－86016691 电话：13715327187 传真：0755-86641139-816
