您好 欢迎来到晧辰科技!    [登录] [注册]
新闻动态全新仪器资讯论坛
快捷发布产品促销资料中心

所有设备分类

新闻动态

促销信息

产品详情

销售是德科技 MX0025A 探头放大器

浏览次数:281

产品参数

选件 是否计量 发货周期 保修时间 成色
3天 3月 8成新
所在地 机身号 状态 资料下载
深圳市 完好
更新日期:2023-10-11
联系电话:0755-86016691

* 产品描述

产品描述:
是德科技的MX0025A InfiniiMax Ultra系列探头放大器提高了可用性,因为您可以使用单个探头尖端测量差分,单端和共模信号。


当你用探头将信号连接到示波器时,它就成为影响测试的电路的一部分。探头可能隐藏了信号细节,降低了信号的负载,或者使信号失真。InfiniiMax Ultra系列探头具有最低的负载,对电路的影响最小。提高您的测试边际,并获得测量信心与他们前所未有的准确性。确保你的整个测量系统是帮助你看到你的信号的最真实的表现。


这些探头具有最低的噪声和电容负载,并且由于其RC高阻抗剖面,在更多频率上具有最低的负载。InfiniiMax Ultra系列支持infinimode,并具有用户定义的交流校准模式,更宽的输入电压范围,更精确的独特s参数特性,更低的电容负载,更宽的输入电压范围,用于更小密度探测的微型/插座探头,以及更多的带宽。InfiniiMax Ultra系列具有RC输入阻抗架构,在最宽的频率范围内具有最低的负载和最小的信号失真。


InfiniiMax Ultra探头具有三种衰减范围- 1:1,4:1和8:1 -为您提供卓越的噪声性能和大电压范围,同时保持最大带宽。输入范围根据输入信号的大小和示波器的垂直刻度自动配置。


从三个灵活的输入动态范围从1:1 600 mVpp, 4:1 2.5 Vpp和8:1 5 Vpp选择。当您的设计令人满意时,清晰地看到并知道,跟上标准,轻松探测小型设备,并使用InfiniiMax Ultra系列探头降低测试复杂性。



特点:

  • 使用25 GHz探测放大器(AP2)测试和验证DDR5/MIPI等高速技术。
  • 在低频探测的中频频率下体验最高的输入阻抗。
  • 以最低的信号退化提高测试裕度。
  • 使用超柔性微型探头探测小型设备,或从最广泛的兼容探头中进行选择,以满足您的独特应用。
  • 使用单个探针尖端测量差分、单端和共模信号。
  • 与Infiniium UXR-、90000 X、Q、V和Z系列示波器配合使用。

详细信息

Product Description:
Keysight’s MX0025A InfiniiMax Ultra Series probe amplifier improves usability because you can measure differential, single-ended, and common mode signals with a single probe tip.


When you use a probe to connect your signal to your oscilloscope, it becomes part of the circuit affecting your test.  Your probe may be hiding signal details, loading down your signal, or distorting it.  InfiniiMax Ultra Series probes have the lowest loading for minimal impact to your circuit.  Boost your test margins and gain measurement confidence with their unprecedented accuracy.  Ensure your entire measurement system is helping you see the truest representation of your signal.


These probes have the lowest noise and capacitive loading and the lowest loading across more frequencies due to their RC high impedance profile.  The InfiniiMax Ultra Series supports InfiniiMode and has a user-defined AC calibration mode, a wider input voltage range, more accuracy with unique S-parameter characterization, lower capacitive loading, a wider input voltage range, micro / socketed probe heads for smaller density probing, and more bandwidths.  The InfiniiMax Ultra Series has an RC input impedance architecture with the lowest loading and least signal distortion across the widest frequency range.


InfiniiMax Ultra probes have three attenuation ranges — 1:1, 4:1, and 8:1 — giving you superior noise performance and large voltage ranges, all while maintaining maximum bandwidth.  The input range automatically configures depending on the size of the input signal and vertical scale of your oscilloscope.


Choose from the three flexible input dynamic ranges from 600 mVpp at 1:1, 2.5 Vpp at 4:1, and 5 Vpp at 8:1.  Clearly see and know when your design is satisfactory, keep up with standards, easily probe small devices, and reduce test complexity with the InfiniiMax Ultra Series probes.



Features:

  • 20 GHz bandwidth (at -3 dB), de-embeddable up to 30 GHz
  • Enables signal verification and debugging of USB4, USB4 Version 2.0, USB 3.x, DisplayPort 1.4/2.0/2.1, Thunderbolt 2/3/4, and MHL 3.3/SuperMHL
  • Breaks out four lanes of high-speed signals for signal measurement or injection as well as low-speed power and control lines to a secondary fixture (N7016A Type-C low-speed fixture)
  • Comes with the form factor to fit two fixtures side-by-side and/or top-and-bottom
  • Provides the elements to seamlessly leverage Keysight’s portfolio of compliance test applications
  • Compatible with Infiniium V-Series, 90000 X, Z-Series, and discontinued 90000 Q-Series

同类热门仪器

友情推荐

合作客户:

查看更多>>

国产仪器:

查看更多>>

进口仪器:

查看更多>>

校准计量:

查看更多>>

Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有  [粤ICP备14101712号-1] [法律顾问]

公司地址:广东省深圳市南山区西丽街道官龙村华纵科技楼5楼  邮编:518055

在线QQ服务:  服务热线:0755-86016691  电话:13715327187  传真:0755-86641139-816

E-mail:info@wl95.com