您好 欢迎来到晧辰科技!    [登录] [注册]
新闻动态全新仪器资讯论坛
快捷发布产品促销资料中心

所有设备分类

新闻动态

促销信息

产品详情

销售Steligent BT6201 四通道误码分析仪

浏览次数:898

产品参数

选件 是否计量 发货周期 保修时间 成色
1-4周 12- 8成新
所在地 机身号 状态 资料下载
深圳市 完好 点击下载
更新日期:2024-04-26
联系电话:0755-86016691

* 产品描述

产品描述:

STELIGENT BT6201是一款高性能,易于使用的4通道高性价比4 x 30Gb / s误码率测试仪(BERT),用于当前100 G TOSA / ROSA组件的研发和制造环境以及现场安装。

它具有表征特征的全部功能串扰敏感性,底板和多通道串行数据系统,它也是一个很好的工具用于AOC和光电模块的生产测试。

BT6201集成了内部参考时钟,码型发生器,时钟恢复电路和BER分析仪集成在一个紧凑的模块中,该模块可同时提供电和光以高达30 Gb / s的数据速率连接。BT6201带有TFT触摸面板控件或USB接口。 

PPRBS输出光学NRZ波形,比特率在25〜30 Gbps之内,可设置的数据模式为27-1、29-1,211-1、215-1、223-1、231-1和固定的64位用户定义模式。 BERT系统受控制通过外部计算机通过USB端口,具有完整的软件支持,驱动程序和编程指南用于自动化。


主要特征:

  • 四个独立的并行BERT通道;
  • 标准测量速率在25Gb / s和30Gb / s之间;
  • 对4个输出中的每个输出进行独立的电压电平调整,请参阅发电机数据
  • 支持所有行业PRBS模式:7、9、11、15、23、31;
  • 半速率时钟(高速)和分频触发输出(低速);
  • 集成时钟数据恢复;
  • 交换数据输入极性的能力;
  • 通过ML4000机箱的快速以太网/ USB接口;
  • 高信号质量,快速上升时间和低固有抖动;
  • BERT可以进行完全编程,并支持来自其他软件的外部API调用,例如LabView,C#,VEE;
  • 可重复的性能并可追溯到标准;
  • 由嵌入式触摸屏GUI或外部运行的用户软件控制Windows 7 PC通过USB接口连接;
STELIGENT BT6201是一款多通道信号完整性测试系统,非常适合手动或手动操作。自动表征多通道串行数据通道或电气和光学设备 以25Gb / s至30Gb / s的速度运行(它通过可选的比特率)。


应用:

  • 多通道串行数据通道信号完整性特性;
  • 100G CFP2,CFP4,QSFP28线卡;
  • 100G有源光缆(AOC),直接连接电缆(DAC);
  • 电光收发器测试;
  • 电信/数据通信,组件,模块和系统的设计验证测试(DVT);
  • 高速SerDes测试和表征;
  • 网络设备的安装和维护测试;
  • 测试光收发器模块(25G SFP +,QSFP28,4X25G CFP2 / CFP4),转发器,线卡和子系统;
  • 光电组件和设备(TOSA,ROSA,激光器等)的测试;
  • 测试Gb / s IC,PCB,电子模块,子系统和系统;
  • 串行总线和高速背板设计;
  • 光传输网络中的安装测试和故障排除;


详细信息

product description:
STELIGENT BT6201 is a high-performance, easy-to-use, 4-channel, cost-effective 4 x 30Gb/s Bit Error Rate Tester (BERT), used in the current R&D and manufacturing environment of 100 G TOSA / ROSA components and on-site installation.

It has the full functional crosstalk sensitivity of characterizing features, backplane and multi-channel serial data system, and it is also a good tool for production testing of AOC and optoelectronic modules.

BT6201 integrates an internal reference clock, a pattern generator, a clock recovery circuit and a BER analyzer in a compact module, which can provide both electrical and optical connections at a data rate of up to 30 Gb/s. BT6201 has TFT touch panel control or USB interface.

PPRBS outputs optical NRZ waveform, the bit rate is within 25~30 Gbps, the data mode that can be set is 27-1, 29-1, 211-1, 215-1, 223-1, 231-1 and fixed 64-bit User-defined mode. The BERT system is controlled via an external computer via a USB port, with complete software support, drivers and programming guides for automation.


Main features:

  • Four independent parallel BERT channels;
  • The standard measurement rate is between 25Gb/s and 30Gb/s;
  • Independent voltage level adjustment for each of the 4 outputs, please refer to generator data
  • Support PRBS modes in all industries: 7, 9, 11, 15, 23, 31;
  • Half-rate clock (high speed) and frequency division trigger output (low speed);
  • Integrated clock data recovery;
  • Ability to exchange data input polarity;
  • Fast Ethernet/USB interface through ML4000 chassis;
  • High signal quality, fast rise time and low inherent jitter;
  • BERT can be fully programmed and supports external API calls from other software, such as LabView, C#, VEE;
  • Repeatable performance and traceable to standards;
  • The Windows 7 PC is controlled by the embedded touch screen GUI or external user software running through the USB interface;


STELIGENT BT6201 is a multi-channel signal integrity test system, very suitable for manual or manual operation. Automatic characterization of multi-channel serial data channels or electrical and optical devices operating at speeds from 25Gb/s to 30Gb/s (it passes through an optional bit rate).



application:

  • Multi-channel serial data channel signal integrity characteristics;
  • 100G CFP2, CFP4, QSFP28 line card;
  • 100G active optical cable (AOC), direct connection cable (DAC);
  • Electro-optical transceiver test;
  • Design verification testing (DVT) of telecommunications/data communications, components, modules and systems;
  • High-speed SerDes testing and characterization;
  • Installation and maintenance testing of network equipment;
  • Test optical transceiver modules (25G SFP+, QSFP28, 4X25G CFP2/CFP4), transponders, line cards and subsystems;
  • Testing of optoelectronic components and equipment (TOSA, ROSA, laser, etc.);
  • Test Gb / s IC, PCB, electronic modules, subsystems and systems;
  • Serial bus and high-speed backplane design;
  • Installation test and troubleshooting in optical transmission network;

同类热门仪器

友情推荐

合作客户:

查看更多>>

国产仪器:

查看更多>>

进口仪器:

查看更多>>

校准计量:

查看更多>>

Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有  [粤ICP备14101712号-1] [法律顾问]

公司地址:广东省深圳市南山区西丽街道官龙村华纵科技楼5楼  邮编:518055

在线QQ服务:  服务热线:0755-86016691  电话:13715327187  传真:0755-86641139-816

E-mail:info@wl95.com