您好 欢迎来到晧辰科技!    [登录] [注册]
新闻动态全新仪器资讯论坛
快捷发布产品促销资料中心

所有设备分类

新闻动态

促销信息

产品详情

销售横河 WT1600  数字功率计

浏览次数:326

产品参数

选件 是否计量 发货周期 保修时间 成色
1-4周 - 8成新
所在地 机身号 状态 资料下载
深圳市 完好
更新日期:2022-12-16
联系电话:0755-86016691

* 产品描述

WT1600是功率计,设计用于测量节能设备中的极小电流,以及测量大电流以评估大型负载。WT1600的工作电压范围为1.5 V至1000 V,可支持多种应用。因为它可以接受多达六个相位的信号输入,所以信号WT1600单元可以测量逆变器上的I / O信号。

 

单个WT1600单元最多可以进行六个不同的功率测量(每个电压和电流输入六个)。通过测量起停功能(同步测量),可以同步两个WT1600单元(12个输入)。

这两个元素都可以一起安装在WT1600中。
5 A输入元件的电流可设置为10 mA,以测量节能设备中的极小电流。

    宽电流输入范围
  • 数据存储速度高达50毫秒(每秒20次)

    数据可以短至50 ms的间隔存储。WT1600快速计算输入参数,例如均方根电压,均方根电流和功率。测量值可以存储在11 MB的内部存储器中,这对以下应用程序很有帮助:
    电动机启动时的特性评估,包括转矩和rpm(需要可选的电动机评估功能)
    照明时测量迅速波动的次级电压和灯电流已开启。

    WT1600具有比同类产品更高的测量精度。

    多种显示格式

    WT1600按时间序列显示每个显示更新间隔的测量结果。时间轴(T / div)可以设置为3秒至24小时(关闭)。
    在长期连续测试中,可以同时观察到多达16个不同参数的变化,例如电压,电流,有功功率和视在功率。

    用于高精度测量

    该图显示了有效的输入测量范围(交流电压和交流电流从1%到110%),通过范围值额定值可以确保精度。使用1 A量程值时,精度可低至10 mA。而且,直流电压和直流电流确保了0%至100%的精度。

    将谐波数据显示为条形图,向量和列表

    内置打印机(可选)

    Wt16print1Wt16print2

    以太网端口(10 BASE-T)和内置硬盘驱动器(可选)

     

    电机评估(可选)
    WT1600可以测量电动机输出上的速度和转矩传感器的输出,并计算转矩,转速,机械功率,同步速度,滑差,电动机效率和总效率。传感器可以接受模拟和脉冲输入。除数值外,还可以显示波形,以提供参数值波动的直观图像。

    D / A输出(30个通道)
    模拟量输出可用于多达30个测量参数。使用6元素的WT1600,每个元素可提供多达5个模拟输出。

    Wt16介面

    SCSI接口(可选)

    使用SCSI接口,您可以将测量数据保存到
    HDD等外部设备。当
    您想有效地保存测量数据和图像文件时,此功能很有用。

    VGA输出

    通过将VGA输出信号连接到
    外部监视器,您可以创建
    数值和波形的大型显示。

    输入信号以高速(大约200 kHz)采样,因此即使在快速波动的输入信号上也可以测量功率。还可以为每种极性分别确定积分功率。 

    Wt16integ

     

    6.4英寸TFT彩色LCD
    能够显示易于查看的四参数显示(在同时显示波形时显示两个参数),或将参数数量增加到78个。

    旋转旋钮
    可以与屏幕旁边的按键组合使用,以便于操作。旋钮使用户可以从屏幕上显示的众多参数中快速找到所需的参数。

    保存波形,数值和屏幕截图
    波形,数值和屏幕截图可以保存到3.5英寸软盘驱动器(标准功能)或可选的内置硬盘驱动器中。可以保存和检索设置。

     
      电流传感器输入范围(5 A和50 A输入元件相同;标准)

详细信息

The WT1600 is power meter designed for measurement of extremely small currents in energy-saving equipment, as well as measurement of large currents for evaluating large-sized loads. The WT1600 works with voltages ranging from 1.5 V up to 1000 V, supporting a wide range of applications. Because it can accept signal inputs for up to six phases, a signal WT1600 unit can measure I/O signals on inverters.

 

Up to Six-Phase Input in One Unit. Synchronized Measurements between two units simplifies your processes.

 

  • Up to Six-Phase Input on One Unit. Synchronized Measurements Between Two Units
  • Wide Current Input Ranges
  • Data Storing as Fast as 50 ms (20 Times per Second)
  • High Precision and Wide Bandwidth
  • Increased Assured-Accuracy Range for High-Precision Measurements
  • A Variety of Display Formats
  • Display Harmonic Data as Bar Graphs, Vectors, and Lists
  • Built-in Printer (Optional)
  • A Variety of Interfaces (Optional)
  • Integration Function Capable of Handling Rapid Changes in Input Signal
  • Other Special Features

The WT1600 has two different input elements. A 5 A input element is provided for measuring extremely small currents, while a 50 A input element serves to measure large currents.

 

  • Two input elements
  • 5 A input element
  • 10/20/50/100/200/500 mA, 1/2/5 A (DC, 0.5 Hz to 1 MHz)
  • 50 A input element
  • 1/2/5/10/20/50 A (DC, 0.5 Hz to 100kHz)

                  50/100/250/500 mV, 1/2/5/10 V (DC, 0.5 Hz to 500 kHz)

Wt16datastore

High Precision and Wide Bandwidth

It also features a 1 MHz measurement bandwidth (voltage, current) effective for such things as the evaluation of high-frequency illumination devices using inverters.
Accuracy Characteristics for 50 A input Element (typical value)
Wt16highp1
Accuracy Characteristics for 5 A input Element (typical value)
Wt16highp2
Accuracy Characteristics for External input (typical value)
Wt16highp3

 In addition to numerical data, the WT1600 can display input signal waveforms. Eleven different display formats can be selected on a single WT1600 unit, so it is not necessary to connect an external waveform viewer to check waveforms.

Increased Assured-Accuracy Range

Wt16IAA

Accuracy is assured at input ranges of 1% to 110% for AC, and 0% to 110% for DC. (However in the case of AC, it is necessary to input either a voltage or current that exceeds 10% relative to the range in order to have the voltage and current rms values calculated precisely.)

Since the voltage and current ranges are fixed during the integration mode, the WT1600's assured accuracy over a wide range makes it a very useful tool.
The WT1600 stands out when it comes to measuring equipment with large input fluctuations such as intermittent control devices and copiers that can repeatedly alternate between normal operation and sleep mode.

The harmonic measurements function is a standard feature on the WT1600. It is capable of measuring waveforms with a fundamental frequency ranging from 10 Hz to 1 kHz. Analysis results up to the 100th order from 50/60 Hz fundamental waves can be displayed as numerical values or bar graphs. The WT1600 can display harmonic measurement result as lists, and fundamental waves as vectors.

Print out screen images using the built-in printer. The printer is located on the front panel allowing you to rack-mount the instrument. You can output not only hard copies of the screen, but also numerical data, and harmonic analysis data as well.

A Variety of Interfaces

The Ethernet function allows you to use FTP server, FTP client, Network printing, Automatic Mail Transfer (SMTP), and others.

Integration Function Capable of Handling Rapid Changes in Inputs

Other Special Features

 

6.4-Inch TFT Color LCD
Capable of displaying an easy-to-view four-parameter display (two parameters during simultaneous display with waveforms), or increasing the number of parameters up to 78.

Rotary Knob
Can be used in combination with keys next to the screen for easy operation. The rotary knob allows the user to rapidly locate the desired parameter from numerous parameters shown on the screen.

Saving Waveforms, Numerical Values, and Screenshots
Waveforms, numerical values, and screenshots can be saved to the 3.5-inch floppy drive (standard feature) or the optional internal hard drive. Settings can be saved and retrieved.

 

 

同类热门仪器

友情推荐

合作客户:

查看更多>>

国产仪器:

查看更多>>

进口仪器:

查看更多>>

校准计量:

查看更多>>

Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有  [粤ICP备14101712号-1] [法律顾问]

公司地址:广东省深圳市南山区西丽街道官龙村华纵科技楼5楼  邮编:518055

在线QQ服务:  服务热线:0755-86016691  电话:13715327187  传真:0755-86641139-816

E-mail:info@wl95.com