浏览次数:876
选件 | 是否计量 | 发货周期 | 保修时间 | 成色 |
---|---|---|---|---|
否 | 1-4周 | 12- | 9成新 | |
所在地 | 机身号 | 状态 | 资料下载 | |
深圳市 | 完好 |
描述:
Keysight 8990A峰值功率计可对当今的复杂脉冲信号进行完整而准确的表征。它能够执行七个自动定时测量(上升时间,下降时间,脉冲宽度,PRI,PRF,占空比和延迟)和五个自动功率测量(峰值功率,平均功率,脉冲顶部/基极幅度和过冲)轻松按下按钮。前面板操作直观而直接。可以使用前面板旋钮输入数据或使用前面板旋钮进行输入。简单的按键即可进行自动测量。
8990A峰值功率计提供两个传感器通道以及两个外部触发/示波器通道,从而可以同时测量调制信号和检测器功率包络。
特征:
1.幅度和时间标记,可精确测量所需功率
2.两个示波器通道,用于测量视频和微波脉冲之间的时间延迟
3.多功能触发可捕获独家故障
4.波形数学函数,用于测量标量脉冲参数
5.动态范围:-32 dBm至+20 dBm
6.最小脉冲宽度:10 ns
7.上升时间:5 ns
8.传感器和视频输入:1和4; 2和3
The Keysight 8990A Peak Power Meter provides complete and accurate characterization of todays complex pulsed signals. It is capable of performing seven automatic timing measurements (rise time, fall time, pulse width, PRI, PRF, duty cycle, and delay) and five automatic power measurement (peak power, average power, pulse top/base amplitude, and overshoot) with push-button ease. Front-panel operation is intuitive and straightforward. Data entries can be typed in or made with the front panel knob; automatic measurements are made with simple keystroke.
The 8990A Peak Power Meter offers two sensor channels plus two external triggering/oscilloscope channels, allowing the simultaneous measurement of modulating signals and detector power envelopes.
Features:
Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有 [粤ICP备14101712号-1] [法律顾问]
公司地址:广东省深圳市南山区西丽街道官龙村华纵科技楼5楼 邮编:518055
在线QQ服务: 服务热线:0755-86016691 电话:13715327187 传真:0755-86641139-816
E-mail:info@wl95.com