浏览次数:1292
选件 | 是否计量 | 发货周期 | 保修时间 | 成色 |
---|---|---|---|---|
否 | 1-4周 | 12- | 8成新 | |
所在地 | 机身号 | 状态 | 资料下载 | |
深圳市 | 完好 |
产品描述;
Agilent 83438A Erbium ASE源为表征光纤组件提供非相干光。它的输出以近似为中心1550nm。由于它具有较高的功率谱密度,所以可以探测具有中等或高插入损耗的器件。其单模输出来源于掺铒光纤放大器的放大自发辐射(ASE)。输出的功率谱密度是边缘发光二极管功率谱密度的100倍(20 dB)。
主要技术特性:
型号 | Agilent 83438A |
总输出功率 | ﹢8.1 dBm 最大 (6.5 mW) ﹢5.5 dBm 最小(3.5 mW) |
功率稳定性 |
< ±0.02 dB (15分钟) < ±0.05 dB (6 小时) |
兼容光纤 | 9/125 µm, single mode |
|
> 30 dB (特征) > 50 dB (特征) |
调制 | 数字(TTL兼容),直流至300hz(特性) |
The Agilent 83438A Erbium ASE Source provides incoherent light for characterizing fiber-optic components. Its output is centered at approximately 1550 nm. Because it has a relatively high-power spectral density, you can probe devices with medium or high insertion loss. Its single-mode output originates from the amplified spontaneous emission (ASE) of an Erbium doped fiber amplifier. The power spectral density of the output is up to one hundred times (20 dB)
model | Agilent 83438A |
Total output power | ﹢8.1 dBm maximum (6.5 mW) ﹢5.5 dBm minimum (3.5 mW) |
Power stability |
< ±0.02 dB (15 minutes) < ±0.05 dB (6 hours) |
Compatible fiber | 9/125 µm, single mode |
Output return loss |
> 30 dB (characteristic) > 50 dB (characteristic) |
Modulation | Digital (TTL compatible), DC to 300 Hz (characteristic) |
Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有 [粤ICP备14101712号-1] [法律顾问]
公司地址:广东省深圳市南山区西丽街道官龙村华纵科技楼5楼 邮编:518055
在线QQ服务: 服务热线:0755-86016691 电话:13715327187 传真:0755-86641139-816
E-mail:info@wl95.com