Haichen team provides professional maintenance and guarantees quality!!
Professional maintenance for HP 8156A optical attenuator. The common faults and their causes are as follows:
1. Inaccurate attenuation value (the actual attenuation deviates significantly from the set value): The main reason is the aging of internal variable attenuation components (such as attenuation sheets, liquid crystal attenuators), and the attenuation characteristics drift. It could also be that the optical path is contaminated by dust or stains, introducing additional unexpected losses and interfering with the attenuation accuracy.
2. Decreased return loss (abnormally increased reflected signal): Mostly due to the wear and contamination of the input/output fiber interface end faces of the optical attenuator (such as scratches, dust accumulation), causing the optical signal reflection to increase; or the deviation of the internal optical path connector alignment, disrupting impedance matching.
3. No attenuation response (no change in output power after setting the attenuation value): It could be a fault in the attenuation control circuit (such as damaged control chips, abnormal driving voltage), unable to drive the attenuation component to adjust; or the complete failure of the internal attenuation component (such as mechanical structure jamming, component burning).
By understanding the common faults of the equipment, you can better maintain and use it, ensuring its long-term stable operation. If you cannot solve it, please contact Haichen! Our maintenance team has rich practical experience and professional maintenance procedures, and can provide you with fast, reliable, and high-quality maintenance services!
Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有 [粤ICP备14101712号-1] [法律顾问]
公司地址：广东省深圳市南山区西丽街道官龙村华纵科技楼5楼 邮编：518055
