晧辰团队专业维修，品质保障!!!
专业维修藤仓 FSM-100 光纤熔接机，其常见的故障及原因分析如下
故障点：熔接损耗偏大
原因分析：光纤端面不干净，V型槽或光纤固定架有杂物，光纤切割端面角度不佳，光学系统故障或熔接机程序错误。
故障点：熔接失败，红色报警
原因分析：熔接损耗过大，光纤对纤或推进失败，光纤端面不平整或有杂物，熔接机程序问题。
故障点：找不到光纤
原因分析：光学系统故障。
故障点：熔接头堵塞
原因分析：熔接头未定期清洗，内部塑料无法正常流动。
故障点：电机故障
原因分析：电机本身故障或电源电压不稳定。
通过了解设备的常见故障，您可以更好地维护和使用它，确保其长期稳定运行。若无法解决，欢迎联系晧辰！我们的维修团队拥有丰富的实战经验和专业的维修流程，可为您提供快速、可靠、优质的维修服务
Hao Chen team professional maintenance, quality assurance!!
Professional maintenance Fujikura FSM-100 optical fiber welding machine, its common faults and causes are analyzed as follows
Fault point: welding loss is too large
Cause analysis: optical fiber end face is not clean, V-shaped slot or optical fiber fixing frame has debris, optical fiber cutting end Angle is not good, optical system failure or welding machine program error.
Fault point: welding failure, red alarm
Cause analysis: welding loss is too large, fiber to fiber or promotion failure, fiber end face uneven or debris, welding machine program problems.
Fault: The optical fiber cannot be found
Cause analysis: Optical system failure.
Fault point: The fuse is blocked
Cause analysis: The fusion joint is not cleaned regularly, and the internal plastic cannot flow normally.
Fault point: Motor failure
Cause analysis: the motor itself is faulty or the power supply voltage is unstable.
By understanding the common faults of the equipment, you can better maintain and use it to ensure its long-term stable operation. If you can not solve, welcome to contact Hao Chen! Our maintenance team has a wealth of practical experience and professional maintenance process, can provide you with fast, reliable, quality maintenance service
Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有 [粤ICP备14101712号-1] [法律顾问]
公司地址：广东省深圳市南山区西丽街道官龙村华纵科技楼5楼 邮编：518055
