皓辰团队专业维修，品质保障!!!
专业维修藤仓 FSM-100M 保偏熔接机，其常见的故障及原因分析如下
故障点：熔接机提示找不到光纤
原因分析：
光学系统出现故障。
故障点：熔接机提示找到左光纤或找不到右光纤
原因分析：
左光纤或右光纤放置不正确，或V型槽有杂物。
马达推进系统故障。
光学系统相关部件故障，包括物镜、反光镜及相关控制电路。
故障点：熔接机提示放电强度不够
原因分析：
电极放电强度系数过低。
电极放电次数过多，表面已被氧化。
电极安装不合格，接触不良。
通过了解设备的常见故障，您可以更好地维护和使用它，确保其长期稳定运行。若无法解决，欢迎联系晧辰！我们的维修团队拥有丰富的实战经验和专业的维修流程，可为您提供快速、可靠、优质的维修服务！
Hao Chen team professional maintenance, quality assurance!!
Professional maintenance Fujikura FMI-100M bias protection welding machine, its common faults and causes are analyzed as follows
Fault point: The welding machine indicates that the optical fiber cannot be found
Reason analysis:
The optical system is faulty.
Fault point: The welding machine prompts that the left fiber is found or the right fiber is not found
Reason analysis:
The left or right optical fiber is incorrectly placed, or the V-shaped slot contains debris.
Motor propulsion system failure.
Failure of optical system related components, including objectives, mirrors and related control circuits.
Fault point: The welding machine indicates that the discharge strength is not enough
Reason analysis:
The discharge intensity coefficient of the electrode is too low.
The electrode has been discharged too many times, and the surface has been oxidized.
Electrode installation is not qualified, poor contact.
By understanding the common faults of the equipment, you can better maintain and use it to ensure its long-term stable operation. If you can not solve, welcome to contact Hao Chen! Our maintenance team has a wealth of practical experience and professional maintenance process, can provide you with fast, reliable, quality maintenance service!
Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有 [粤ICP备14101712号-1] [法律顾问]
公司地址：广东省深圳市南山区西丽街道官龙村华纵科技楼5楼 邮编：518055
