您好 欢迎来到晧辰科技!    [登录] [注册]
晧辰仪联网
新闻动态|全新仪器|资讯论坛
快捷发布|产品促销|资料中心

所有设备分类

新闻动态

促销信息

产品详情

租赁安立 MS2691A 无线通信频谱分析仪

浏览次数:143

晧辰自营,品质保证,配送快捷

产品参数

选件 状态 设备价值 是否计量
完好 0 否
成色 发货周期 所在地
8成新 -- 深圳市
租赁价格: 电议
更新日期:2024-09-06
联系电话:0755-86016691

*产品描述

产品描述:
MS269xA系列信号分析仪是针对下一代通讯应用的最高性能的矢量信号分析仪。它包括扫频模式分析,FFT模式信号分析,和高精度的数字化仪功能。添加各种选件以组成信号发生器,将仪器打造成即插即用的一体化无忧解决方案。


MS269xA系列信号分析仪支持31.25 MHz的标准分析带宽,可扩展到62.5 MHz/125 MHz的选件。该频谱仪使用内部校准电路(安立专利),在6 GHz的频率跨度内对幅度和相位进行校准,校准后使精度保持在±0.5 dB范围内。市场上没有任何其他的分析仪可满足该性能!这些组成模块的性能十分优越 - 它们采用最新技术来最广泛的测量信号,使测试速度比以往任何时候都快。模块化的结构保证了整个框架结构的性能,确保了整体性能的显著提高。


MS269xA系列信号分析仪的选件包括基于通信标准的调制分析,矢量信号发生器和BER测量软件。最终用户可以配置一套完整的解决方案,大大降低了用于设备评估的成本,测试设备的空间,及测试周期。


该系列信号分析仪对于研发测试环境具有足够的测量精度,同时也能为产线提供足够快的速度!目前支持的应用包括GSM,GPRS,EDGE,W-CDMA,LTE和5G技术。


宽带高速FFT信号分析(标准分析带宽为31.25 MHz和62.5 MHz/125 MHz的选件)功能包括CCDF测量功能,频率 vs 时间,和功率vs 时间的高速连续测量。标准的数字化功能能够精确地捕获波形,并立即使用信号发生器选件播放出来。增加一个扩展的数字化选件,可以捕捉20 MHz的信号长达4个小时。


特点:

  • 频率范围: 50 Hz to 13.5 GHz
  • 分析带宽:31.25 MHz (标配) 62.5 MHz/125 MHz (选件)
  • 选配内置信号源选件,可作为一体化的基站测试解决方案
  • 批量捕获测量技术,实现最快速度的分析测量
  • 支持5G NR(sub-6 GHz)TDD/FDD
  • 基于宽测量动态范围的EVM性能:小于0.5%
  • EVM测量时可一键优化动态范围

详细信息

Product Description:
MS269xA Series Signal Analyzers are the latest high performance signal analyzers for next-generation communication applications. The MS269xA Series Signal Analyzer base units include swept spectrum analysis, FFT signal analysis, and a precision digitizer function. Add options to incorporate a Signal Generator, to turn the instrument into a hassle free, plug and play, one box solution.


The MS269xA Series Signal Analyzers support a standard analysis bandwidth of 31.25 MHz that can be extended to 62.5 MHz /125 MHz with optional hardware. Using a patented calibration process, the multipoint amplitude calibration and the phase calibration result in a level accuracy of ±0.5 dB across a 6 GHz span. No other analyzer on the market can meet that specification! These boxes are superlative in every way -- they measure the widest signals and using the latest technology, make measurements faster than ever before. The modular architecture ensures a box that grows as measurement requirements change.


A series of options enables standards-based modulation analysis, vector signal generation, and BER measurement. The end-user can configure a one-box solution that dramatically reduces cost, footprint, and Total Average Cycle Time (TACT) for device evaluation.


The MS269xA Series Signal Analyzers are accurate enough for the most demanding R&D environment, yet are fast enough for the factory floor! Currently supported applications include GSM, GPRS, EDGE, W-CDMA, and LTE.


The wideband FFT signal analyzer (analysis bandwidth of 31.25 MHz with option for 62.5 MHz /125 MHz) supports high-speed continuous measurements including CCDF, frequency vs. time, spectrum, and power vs. time analysis. The standard digitizing function can capture waveforms and immediately play them out using the optional Signal Generator. An extended digitizer option adds the ability to capture signals up to 20 MHz wide for up to 4 hours.


Features:

  • Frequency Range: 50 Hz to 13.5 GHz
  • Analysis Bandwidth:31.25 MHz (standard) 62.5 MHz / 125 MHz (option)
  • Supports 5G NR (sub-6 GHz) TDD/FDD
  • Wide measurement dynamic range EVM performance: <0.5%
  • One-button dynamic-range optimization at EVM measurement
  • Offers modulation analysis, such as LTE/LTE-Advanced (FDD/TDD), WLAN IEEE 802.11ac etc. (with optional software)
  • One-Box Tester with the addition of the Signal Generator option
  • Batch Capture Measurements for the fastest analysis time
  • Supports Noise Figure measurement (option)

同类热门仪器

友情推荐

合作客户:

查看更多>>

国产仪器:

查看更多>>

进口仪器:

查看更多>>

校准计量:

查看更多>>

联系我们

QQ

在线QQ服务

立即联系

服务热线

0755-86016691

13602653900

传真

0755-86641139-816

电子邮箱

info@wl95.com

Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有  [粤ICP备14101712号-1] [法律顾问]

公司地址:广东省深圳市南山区南山智谷产业园F座1402  邮编:518055