用于34980A多功能开关/测量单元的Keysight 34951A模块具有四个电子校准的模拟通道，可以输出高达16位分辨率的+/- 16V DC或+/- 20mA DC。每个通道可以200 kHz的更新速率单独更新。您可以使用提供的标准波形，也可以创建自己的500,000点以上的波形。这些点可以在一个或多个通道之间动态分配，并作为点对点的任意波形输出。
这些D / A可用于向被测设备提供偏置电压，控制模拟可编程电源或将输出用作控制系统的设定点。标准的50针Dsub连接器允许与标准电缆，接线盒或整体互连解决方案一起使用。
The Keysight 34951A module for the 34980A Multifunction Switch/Measure Unit has four electronically calibrated analog channels that can output up to +/-16V DC or +/-20mA DC with 16 bits of resolution. Each channel can be updated individually with a 200 kHz update rate. You can use the standard waveforms provided or create your own with over 500,000 points. These points can be dynamically allocated among one or more channels and output as a point-to-point arb.
These D/As are useful to source bias voltages to your device under test, to control your analog programmable power supplies, or use the outputs as setpoints for your control systems. Standard 50-pin Dsub connectors allow for use with standard cables, terminal blocks, or mass interconnect solutions.
Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有 [粤ICP备14101712号-1] [法律顾问]
公司地址：广东省深圳市南山区南山智谷产业园F座1402 邮编：518055
