浏览次数：111
| 选件 | 是否计量 | 发货周期 | 保修时间 | 成色 |
|---|---|---|---|---|
| 否 | 5天 | 90天 | 8成新 | |
| 所在地 | 机身号 | 状态 | 资料下载 | |
| 深圳市 | 完好 |
产品描述：
MTS-5800 手持式网络测试仪是网络技术人员和工程师在安装、开通和维护网络时所必需的一种工具。它支持各种传统技术和新兴技术，可自如应对各种各样的网络应用，包括城域/核心、移动回传和企业服务网络。业界最小的手持式仪表，可在整个业务周期内的各个阶段进行测试，包括光纤特性分析、服务激活、故障排除和维护。先进的以太网测试功能（例如依据 RFC 6349 的 TrueSpeed、J-Profiler™、线速捕获/解码以及自动化 J-Mentor），可帮助现场技术人员比以往更快速、更准确地测试网络。
优势：
使用全功能双 10 G 手持式设备简化多技术测试
通过多触点屏幕、脚本化工作流和清晰的结果，针对现场使用进行了优化
以可重复方法和程序支持高效最佳实践
加快光纤特征分析、以太网服务激活和故障排除测试的速度
使基站技术人员能够轻松地安装和维护回传和前传网络
不再需要花费昂贵的成本和冒着重重危险攀爬发射塔
特点：
全负荷 TDM/PDH 至双 10 G 以太网、SONET、SDH、光纤信道和 OTN 支持
依据 ITU-T Y.1564 的自动化增强型 RFC 2544 和 SAMComplete 测试
依据 MEF 34 和 RFC 6349 TrueSpeed™ TCP 吞吐量测试的集成突发测试方法
包括 PTP/1588v2、SyncE、Wander 和“单向延迟”测试在内的集成定时/同步测试
前传测试 CPRI/OBSAI 第 1 层/第 2 层以及基带单元和远端射频单元仿真
单端口和双端口版本
与 VIAVI 4100 系列 OTDR 模块以及 Smart Link Mapper™、光纤显微镜和光功率计兼容
BBU 仿真
RFoCPRI
应用：
移动和回传特征分析、验证及故障排除
在 10 Mbps 至 10 G 接口上进行的聚合以太网/IP 网络测试和故障排除
光纤链路特征分析和故障排除
OTN 以及传统 SONET/SDH 和 TDM/PDH 网络的安装和维护
无线同步技术（例如 PTP/1588v2 和 SyncE）的安装和维护
在无线基站处进行的远程射频头 (RRH) 测试
通过 CPRI 链路和 BBU 仿真，从塔底测试 RRH 运行状况
从光测试接入点处确定 PIM 和干扰问题 (RFoCPRI)
Product Description:
The MTS-5800 Handheld Network Tester is an essential tool for network technicians and engineers to install, turn up and maintain networks. It supports a variety of legacy and emerging technologies and can handle a wide variety of network applications, including metro/core, mobile backhaul and enterprise service networks. The industry's smallest handheld meter for testing at all stages of the entire business cycle, including fiber characterization, service activation, troubleshooting, and maintenance. Advanced Ethernet testing capabilities, such as TrueSpeed per RFC 6349, J-Profiler™, wire-speed capture/decode, and automated J-Mentor, help field technicians test networks faster and more accurately than ever before.
Advantage:
Simplify multi-technology testing with a full-featured dual 10G handheld
Optimized for field use with multi-touch screens, scripted workflows and clear results
Support efficient best practices with repeatable methods and procedures
Accelerates fiber characterization, Ethernet service activation, and troubleshooting testing
Enables base station technicians to easily install and maintain backhaul and fronthaul networks
No more expensive and risky climbing towers
Features:
Full-load TDM/PDH to dual 10G Ethernet, SONET, SDH, Fibre Channel and OTN support
Automated enhanced RFC 2544 and SAMComplete testing according to ITU-T Y.1564
Integrated burst test method according to MEF 34 and RFC 6349 TrueSpeed™ TCP throughput test
Integrated timing/synchronization tests including PTP/1588v2, SyncE, Wander, and "One-Way Delay" tests
Fronthaul testing CPRI/OBSAI Layer 1/Layer 2 and baseband unit and far-end RF unit emulation
Single and dual port versions
Compatible with VIAVI 4100 Series OTDR modules as well as Smart Link Mapper™, fiber microscopes and optical power meters
BBU emulation
RFoCPRI
Application:
Mobile and Backhaul Characterization, Verification, and Troubleshooting
Converged Ethernet/IP Network Testing and Troubleshooting on 10 Mbps to 10 G Interfaces
Fiber Link Characterization and Troubleshooting
Installation and maintenance of OTN and legacy SONET/SDH and TDM/PDH networks
Installation and maintenance of wireless synchronization technologies such as PTP/1588v2 and SyncE
Remote Radio Head (RRH) testing at wireless base stations
Test RRH health from the bottom of the tower with CPRI link and BBU emulation
Determining PIM and Interference Issues from Optical Test Access Points (RFoCPRI)
Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有 [粤ICP备14101712号-1] [法律顾问]
公司地址：广东省深圳市南山区西丽街道官龙村华纵科技楼5楼 邮编：518055
