The following is an introduction of ROHDE&SCHWARZ FSUP50 spectrum analyzer. Features Wide frequency range: the frequency range is from 20Hz to 50GHz, and the frequency range can be extended to 110GHz with external mixers, even supporting external mixers up to 1THz. Flexible phase noise measurement: it has the greatest flexibility in phase noise measurement, and can measure residual phase noise, AM noise, etc., and can also measure phase noise by spectrum analyzer. Comprehensive signal analysis: It can analyze digital and analog modulation signals, including the demodulation of GSM/EDGE, W-CDMA, TD-SCDMA, cdma2000 and other standards, as well as the time domain analysis of signals and the transient response analysis of oscillators. Large dynamic range: the maximum dynamic range can be achieved by cross-correlation technology, which can detect, suppress and list interference signals, as well as analyze the stability time and oscillator characteristics. Rich measurement functions: it has noise figure and gain measurement function, supports fast ACP measurement in time domain, uses CCDF function for statistical signal analysis, and RMS detector with 100dB dynamic range. Resolution bandwidth: 10Hz to 50MHz. Display average noise level:–-152dBm； at 2GHz; –148 DBM at 26GHz (1 Hz bandwidth). Phase noise: typical–160 DBC (1 Hz), 10MHz carrier offset. Toi: > 20 DBM, typical +25dBm. 1dB compression: +13dBm(0dB RF attenuation).
Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有 [粤ICP备14101712号-1] [法律顾问]
公司地址：广东省深圳市南山区西丽街道官龙村华纵科技楼5楼 邮编：518055
