您好 欢迎来到晧辰科技!    [登录] [注册]
新闻动态全新仪器资讯论坛
快捷发布产品促销资料中心

所有设备分类

新闻动态

促销信息

产品详情

销售斯坦福 FS752 频率计

浏览次数:40

产品参数

选件 是否计量 发货周期 保修时间 成色
5天 90天 二手
所在地 机身号 状态 资料下载
深圳市 完好
更新日期:2025-05-12
联系电话:0755-86016691

* 产品描述

  • 功能特性
    • 高精度时频参考:内置双烘箱 OCXO 时基,在 10Hz 偏移时相位噪声小于 - 125dBc/Hz,能提供高精度的时间和频率标准,为实验室设备校准等应用提供稳定可靠的时频参考。
    • 多星座跟踪:内置的接收器可跟踪 GPS、GLONASS、北斗、伽利略四个主要 GNSS 星座中的任何一个,确保在不同环境下都能获取准确的卫星信号,实现高精度的时间同步和频率校准。
    • 丰富的输出接口:提供 5 路缓冲 10MHz 输出,可产生 1Vrms/50Ω 的信号,作为实验室设备的频率参考;还提供 2 路缓冲 1pps 输出,产生 10μs 脉冲,5V CMOS 逻辑,上升沿与 UTC 对齐,为各种需要精确同步的设备提供时间基准。此外,后面板可选多达 8 路额外的 10MHz 和 1pps 输出,满足更多设备的同步需求。
    • 天线接口与配置:为远程有源 GNSS 天线提供偏置,天线输入有一个母 BNC 连接器,提供 + 5V 偏置,输入阻抗为 50Ω,支持 + 20dBi 至 + 32dBi 净增益的天线(电缆损耗后)。后面板上还有一个可配置的 SPDT 开关,默认情况下,每当 FS752 失去对 GNSS 信号的锁定时,报警设置为有效,也可设置为监控时基的健康或仪器的保持状态。
    • 远程控制与编程:可通过 USB 端口进行控制和查询,使用丰富的高级命令集完全可编程,还配备免费的 GNSS DO 应用程序,方便用户发送命令、查看仪器状态和更改 FS752 的配置,便于远程操作和管理,提高工作效率。

详细信息

SRS FS752 is a GPS/GNSS synchronous clock. The product overview is as follows:
Functional Features
High-precision Time and Frequency Reference: With a built-in dual-oven OCXO time base, the phase noise is less than -125dBc/Hz at a 10Hz offset. It can provide a high-precision time and frequency standard, offering a stable and reliable time and frequency reference for applications such as calibration of laboratory equipment.
Multi-Constellation Tracking: The built-in receiver can track any of the four major GNSS constellations, namely GPS, GLONASS, Beidou, and Galileo. This ensures the acquisition of accurate satellite signals in different environments, enabling high-precision time synchronization and frequency calibration.
Rich Output Interfaces: It provides 5 buffered 10MHz outputs, capable of generating a 1Vrms/50Ω signal, which can serve as a frequency reference for laboratory equipment. Additionally, it offers 2 buffered 1pps outputs, generating a 10μs pulse with 5V CMOS logic. The rising edge is aligned with UTC, providing a time reference for various devices requiring precise synchronization. Moreover, the rear panel optionally has up to 8 additional 10MHz and 1pps outputs to meet the synchronization needs of more devices.
Antenna Interface and Configuration: It provides bias for the remote active GNSS antenna. The antenna input has a female BNC connector, providing a +5V bias with an input impedance of 50Ω, and supports antennas with a net gain of +20dBi to +32dBi (after cable loss). There is also a configurable SPDT switch on the rear panel. By default, the alarm is set to be active whenever the FS752 loses lock on the GNSS signal. It can also be set to monitor the health of the time base or the hold state of the instrument.
Remote Control and Programming: It can be controlled and queried via the USB port. It is fully programmable using a rich set of advanced commands. It is also equipped with a free GNSS DO application, which is convenient for users to send commands, check the status of the instrument, and change the configuration of the FS752, facilitating remote operation and management and improving work efficiency.

同类热门仪器

友情推荐

合作客户:

查看更多>>

国产仪器:

查看更多>>

进口仪器:

查看更多>>

校准计量:

查看更多>>

联系我们

QQ

在线QQ服务

立即联系

服务热线

0755-86016691

13715327187

传真

0755-86641139-816

电子邮箱

info@wl95.com

Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有  [粤ICP备14101712号-1] [法律顾问]

公司地址:广东省深圳市南山区西丽街道官龙村华纵科技楼5楼  邮编:518055