皓辰团队专业维修，品质保障!!!
专业维修藤仓 FSM-60S 熔接机，其常见的故障及原因分析如下
故障点：熔接机显示放电过左或过右
原因分析：电容器老化或损坏、电源电压不稳定、熔接头接触不良或压力不足、工作环境灰尘导致放电电压不稳定。
故障点：熔接机电池容量不足
原因分析：电池长期未充电导致自放电严重，电池容量逐渐降低；电池老化，性能下降，无法存储足够的电能。
故障点：熔接机聚焦不正常
原因分析：镜头受到污染或损坏，导致光线无法正常聚焦；聚焦电机故障，无法调整焦距。
故障点：熔接机无法识别光纤
原因分析：光纤端面质量差，存在缺陷或污染；光纤类型与熔接机设置不匹配；光纤对准系统出现故障。
故障点：熔接机放电校正失败
原因分析：电极磨损或污染严重，导致放电不稳定；校正过程中受到外部干扰，如电磁场等；熔接机内部电路出现故障
通过了解设备的常见故障，您可以更好地维护和使用它，确保其长期稳定运行。若无法解决，欢迎联系晧辰！我们的维修团队拥有丰富的实战经验和专业的维修流程，可为您提供快速、可靠、优质的维修服务！
Hao Chen team professional maintenance, quality assurance!!
Professional maintenance Fujikura FSM-60S welding machine, its common faults and causes are analyzed as follows
Fault point: Welding machine display discharge too left or too right
Cause analysis: aging or damage of capacitors, unstable power supply voltage, poor connector contact or insufficient pressure, and dust in the working environment lead to unstable discharge voltage.
Fault point: Insufficient battery capacity of welding machine
Cause analysis: the battery is not charged for a long time, resulting in serious self-discharge, and the battery capacity is gradually reduced; Batteries age and degrade, unable to store enough power.
Fault point: The focus of the welding machine is abnormal
Cause analysis: The lens is polluted or damaged, resulting in the light can not focus normally; The focusing motor is faulty and the focal length cannot be adjusted.
Fault point: The welding machine cannot identify the optical fiber
Cause analysis: the quality of fiber end face is poor, there are defects or pollution; The optical fiber type does not match the welding machine Settings; The optical fiber alignment system is faulty.
Fault point: welding machine discharge correction failure
Cause analysis: electrode wear or pollution is serious, resulting in unstable discharge; External interference, such as electromagnetic field, is encountered during calibration; The internal circuit of the welding machine is faulty
By understanding the common faults of the equipment, you can better maintain and use it to ensure its long-term stable operation. If you can not solve, welcome to contact Hao Chen! Our maintenance team has a wealth of practical experience and professional maintenance process, can provide you with fast, reliable, quality maintenance service!
Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有 [粤ICP备14101712号-1] [法律顾问]
公司地址：广东省深圳市南山区西丽街道官龙村华纵科技楼5楼 邮编：518055
