皓辰团队专业维修，品质保障!!!
专业维修藤仓 FSM-100P 保偏熔接机，其常见的故障及原因分析如下
故障点：开机无反应
原因分析：电源故障、电池电量耗尽、电源适配器未接入或内部主板故障。
故障点：显示屏异常
原因分析：显示屏损坏、显示电路故障或连接线路问题。
故障点：熔接时光纤不推进
原因分析：光纤脆弱易断、护套压板无法紧固光纤或内部马达故障。
故障点：无法自动加热
原因分析：自动加热功能未开启、自动加热传感器卡死、加热键损坏或内部加热器故障。
Hao Chen team professional maintenance, quality assurance!!
Professional maintenance Fujikura FSM-100P bias maintaining welding machine, its common faults and causes are analyzed as follows
Fault point: No response on startup
Cause analysis: The power supply is faulty, the battery is exhausted, the power adapter is not connected, or the internal mainboard is faulty.
Fault: The display is abnormal
Cause analysis: The display is damaged, the display circuit is faulty, or the connection line is faulty.
Fault point: The optical fiber does not advance during welding
Cause analysis: The optical fiber is fragile, the sheath pressure plate cannot tighten the optical fiber, or the internal motor is faulty.
Point of failure: Automatic heating is not possible
Cause analysis: The automatic heating function is not enabled, the automatic heating sensor is stuck, the heating key is damaged, or the internal heater is faulty.
By understanding the common faults of the equipment, you can better maintain and use it to ensure its long-term stable operation. If you can not solve, welcome to contact Hao Chen! Our maintenance team has a wealth of practical experience and professional maintenance process, can provide you with fast, reliable, quality maintenance service!
Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有 [粤ICP备14101712号-1] [法律顾问]
公司地址：广东省深圳市南山区西丽街道官龙村华纵科技楼5楼 邮编：518055
