Product Introduction:
The 81104A extends the frequency range by adding up to 16 kbit of RZ/NRZ (return to zero/non-return to zero) code capability per channel. An NRZ selector channel can provide a trigger function at any desired point in the code, or be used as an additional code source.
If both 81105A output modules are available, you can add output. This allows different pulse waveforms to be generated to simulate failures, test clock recovery circuits, or generate level 3 or 4 code.
The channel addition function or 1000 ohm source mode can operate at frequencies up to 60 MHz. Combined, the two can achieve a maximum speed of about 15 MHz.
Features:
-
Single/double channel pulse code generator
-
80 MHz, 10 V, 50 Ohm to 50 Ohm
-
You can choose trigger or PLL operation