浏览次数:263
选件 | 是否计量 | 发货周期 | 保修时间 | 成色 |
---|---|---|---|---|
否 | 1-4周 | 3月 | 8成新 | |
所在地 | 机身号 | 状态 | 资料下载 | |
深圳市 | 完好 |
工程师通常必须探测具有高信号保真度的高频信号。典型的具有高输入R和C的无源探头在较低频率时提供良好的响应,但在较高频率时不适当地负载电路并扭曲信号。ZS系列具有高输入R (1 MΩ)和低输入C (0.9 pF),以减少整个探头/示波器带宽的电路负载。ZS1000是理想的200-600 MHz示波器。
ZS系列探头的小尺寸和广泛的标准和可选尖端配件确保该探头可以满足任何困难的探测挑战。各种灵活的引线和夹子,如直角引线,y型适配器和微型挂钩,也可用于探测间隔更远的测试点。
保持接地回路短是消除高电感对信号影响的关键。ZS系列探头提供多种接地能力,通过消除环路对信号的影响,提供最高的信号保真度。
特点:
Engineers must commonly probe high frequency signals with high signal fidelity. Typical passive probes with high input R and C provide good response at lower frequencies, but inappropriately load the circuit, and distort signals, at higher frequencies. The ZS Series features both high input R (1 MΩ) and low input C (0.9 pF) to reduce circuit Loading across the entire probe/oscilloscope bandwidth. The ZS1000 is ideal for 200–600 MHz oscilloscopes.
The small form factor and extensive range of standard and optional tip accessories for the ZS Series of probes ensures that this probe can meet any difficult probing challenge. Various flexible leads and clips, such as right-angle leads, Y-adapters, and pico hooks, are also available for probing test points that are spaced farther apart.
Keeping the ground loop short is critical to eliminating the effect of high inductance on the signal. The ZS Series of probes provides several grounding capabilities to offer the highest signal fidelity by eliminating the effect of that loop on the signal.
Features:
Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有 [粤ICP备14101712号-1] [法律顾问]
公司地址:广东省深圳市南山区西丽街道官龙村华纵科技楼5楼 邮编:518055
在线QQ服务: 服务热线:0755-86016691 电话:13715327187 传真:0755-86641139-816
E-mail:info@wl95.com