Product introduction:
Chroma 61502 Programmable AC Power series AC power supply sets a new standard for high-performance AC power products in the industry. This line of products offers powerful usage features such as grid interference simulation, programmable output impedance, full range of measurement functions, and synthetic waveforms with IEC standard test software. These characteristics make the Chroma61500 series suitable for the development and application of general commercial products, power electronics, avionics, military and IEC standard testing, from laboratory table testing to mass production units.
The Chroma 61502 programmable AC power family provides users with single-phase output products of different capacities, from 500VA to 4000VA. Whether in R & D design, product verification or mass production test, there are the most perfect application choice.
The Chroma 61502 series of programmable AC power supplies uses the most advanced pulse width modulation technology, enabling the ability to output up to 6 times the maximum rated peak current, making the Chroma61500 series the best choice for testing surge current.
Not only provides pure AC voltage applications, AC+DC mode also provides extended functions to provide DC offset voltage applications. The Chroma61500 series uses advanced digital signal processing technology (DSP) to provide high precision and instantaneous voltage waveform measurements such as root mean square voltage, root mean square current, real power, power factor, current crest factor and up to 40 current harmonic components.
The Chroma 61502 programmable AC Power series provides users with the ability to combine different harmonic components for synthesizing harmonic distortion wave shapes. An input-external analog signal port is also provided to generate an analog signal from any signal generator and amplify the signal to mimic the actual observed waveform.
With a versatile programmable waveform setting and easy to use operating software, the Chroma61500 series AC power supply enables users to complete the standard immunity tests conforming to IEC 61000-4-11/-4-13/-4-14/-4-28. The harmonic characteristics of low impedance and low voltage make Chroma61505 the best choice to meet IEC 61000-3-2 standards. In addition, programmable output impedance, if coupled with scintillation measuring instruments, can be performed IEC61000-3-3 standard tests.
Features:
-
Advanced pulse width modulation technology provides high power density output
-
Ac + DC output mode provides DC voltage offset simulation
-
Programmable variable slope Settings when changing voltage and frequency
-
The low output impedance complies with IEC 61000-3-2 standard tests
-
The programmable output impedance complies with IEC 61000-3-3 standard tests
-
Complete measurement features, including current harmonic measurement
-
Ac phase Angle (start/end) setting can be controlled
-
Provides a TTL signal marking the instantaneous output
-
Provides an input port that accepts any analog signal
-
Three-phase power output (combined with three AC power supplies)
-
Easy to operate interface software
-
GPIB and RS-232 interface (optional)
-
It can simulate IEC 61000-4-11 standard for voltage drop, short circuit interruption and voltage change specified items for testing
-
Can comply with IEC 61000-4-13 standard for harmonics and inter-harmonics specified items test
-
Programmable voltage and current limits
-
LIST, PULSE, STEP mode function can simulate power line interference test
-
High output current peak factor is the best choice for surge current testing
服务热线：0755－86016691 电话：13715327187 传真：0755-86641139-816
