您好 欢迎来到晧辰科技!    [登录] [注册]
新闻动态全新仪器资讯论坛
快捷发布产品促销资料中心

所有设备分类

新闻动态

促销信息

产品详情

销售日置 BT3561 电池测试仪

浏览次数:104

产品参数

选件 是否计量 发货周期 保修时间 成色
7天 12月 9成新
所在地 机身号 状态 资料下载
深圳市 完好
更新日期:2023-05-18
联系电话:0755-86016691

* 产品描述

产品描述:
BT3561A电池测试仪可以在生产线上检查完整的电池、模块和包的质量。用户可以通过测量内阻(AC-IR)和开路电压(OCV)来检查电池质量。在电池生产工厂生产的电池在经过装运检验后被运送到模块生产工厂。由于运输过程中的振动,甚至时间的流逝等因素都可能导致缺陷,所以电池在组装成模块和包之前要进行验收。
 

 

与以前的型号相比,BT3561A大幅提高了线阻公差。这种改进使得使用继电器构建具有大量通道的测试系统变得容易。此外,对于正在使用的系统,更长的维护周期意味着更少的维护工时。最后,它能够处理更细的电缆,这使得布线更容易。(AWG 29线相当于2.2 Ω在一个8米的往返可以使用3 mΩ或30 mΩ范围。)

 

 

BT3561A是一款非常先进的电池测试仪,最适合用于电池和电池组的运输和验收检查。它同时测量内阻和电池开路电压(OCV)。由于采用交红外测量方法,测量时间缩短。此外,该方法获得了重复性高的结果。该测试仪具有高精度的3 mΩ范围,允许对电池焊片和母线进行电阻测量。所有这些结合在电池测试的最佳选择。

 
 

 

特点:

  • 同时测试内部阻抗和开放型电压
  • 测量用于动力的小型电池、60V以下的小型电池组
  • 内部阻抗(AC-IR)测量量程: 30 mΩ/300 mΩ/3 Ω/30 Ω/300 Ω/3 kΩ
  • 开放型电压测量量程: 6 V/60 V
  • 接口搭载LAN

详细信息

Product Description:
The BT3561A Battery HiTester can inspect the quality of completed cells, modules, and packs on production lines.  Users can measure internal resistance (AC-IR) and open-circuit voltage (OCV) to check battery quality.  Cells produced at the cell production factory are shipped to the module production factory after undergoing a shipping inspection.  Since factors such as vibrations during shipment and even the passage of time can cause defects, batteries undergo an acceptance inspection before being assembled into modules and packs.
 
 

 

The BT3561A has dramatically improved tolerances for line resistance compared to previous models.  This improvement makes it easy to build test systems with large numbers of channels using relays.  Additionally, a longer maintenance cycle for systems in use means fewer maintenance man-hours.  Finally, its capability to handle thinner cables* makes it easier to route cables.  (AWG 29 wire equivalent to 2.2 Ω over an 8 m round trip can be used with the 3 mΩ or 30 mΩ range.)

 
 

 

The BT3561A is a highly advanced battery tester that is best suited for shipping and acceptance inspections of cells and battery packs. It simultaneously measures internal resistance and the battery's open-circuit voltage (OCV). Since the AC-IR measurement method is used, the measurement time is shortened. In addition, highly repeatable results are attained with this method. This tester has a highly accurate 3 mΩ range, allowing for a resistance measurement of battery tab welding and bus bars. All of this combines for the best choice in battery testers.

 
 

 

Features:

  • Simultaneous measurement of internal resistance and open circuit voltage.
  • Fully automated production line testing of small cells for power motors or small packs of up to 60 V.
  • Resistance measurement ranges: 30 mΩ/300 mΩ/3 Ω/30 Ω/300 Ω/3 kΩ
  • Voltage measurement ranges: 6 V/60 V
  • Equipped with LAN

同类热门仪器

友情推荐

合作客户:

查看更多>>

国产仪器:

查看更多>>

进口仪器:

查看更多>>

校准计量:

查看更多>>

Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有  [粤ICP备14101712号-1] [法律顾问]

公司地址:广东省深圳市南山区西丽街道官龙村华纵科技楼5楼  邮编:518055

在线QQ服务:  服务热线:0755-86016691  电话:13715327187  传真:0755-86641139-816

E-mail:info@wl95.com