您好 欢迎来到晧辰科技!    [登录] [注册]
新闻动态全新仪器资讯论坛
快捷发布产品促销资料中心

所有设备分类

新闻动态

促销信息

产品详情

销售泰克 MDO4054B-3 混合域示波器

浏览次数:391

产品参数

选件 是否计量 发货周期 保修时间 成色
1-4周 3月 8成新
所在地 机身号 状态 资料下载
深圳市 完好
更新日期:2022-12-27
联系电话:0755-86016691

* 产品描述

产品描述:
泰克MDO4054B-3混合域示波器提供4个500 MHz带宽的模拟通道,上升时间为700 ps。该单元提供9 kHz至3 GHz的射频通道频率范围。时间协调模拟,数字和射频信号采集可用在这一台仪器。将示波器集成到您的设计中,快速有效地解决复杂的设计问题。观察频域,并将事件与域现象引起事件的时间联系起来。频域视图中显示的频谱取自时域视图中由短橙色条指示的时间段-称为频谱时间。使用MDO4054B-3,可以通过采集移动频谱时间,以研究RF频谱如何随时间变化。这可以在示波器工作和运行时完成,也可以在停止采集时完成。


使用传统的示波器FFT,通常可以获得FFT显示的理想视图,或其他感兴趣的时域信号的理想视图,但不能同时获得这两者。这是因为传统示波器只有一个采集系统,只有一组用户设置,如记录长度、采样率和每格时间,这些设置驱动所有数据视图。但是对于泰克MDO4054B-3,频谱分析仪有自己的采集系统,该系统独立于模拟和数字通道采集系统,但与时间相关。这允许优化配置每个域,为所有感兴趣的模拟、数字和射频信号提供完整的时间相关系统视图。


特点:

混合域分析
  • 时间相关的模拟,数字和射频信号采集在一个单一的仪器
  • Wave Inspector控件提供了从时域和频域的时间相关数据的轻松导航
  • 来自射频输入的振幅、频率和相位与时间波形
  • 可选择的频谱时间,以发现和分析RF频谱如何随时间变化-即使在停止采集


光谱分析

  • 专用的前面板控件通常执行的任务
  • 自动峰值标记器识别频谱峰值的频率和振幅
  • 手动标记可以实现非峰值测量
  • 跟踪类型包括:正常、平均、最大保持和最小保持
  • 检测类型包括:+峰值、-峰值、平均和样本
  • 频谱图显示可以方便地观察和洞察缓慢变化的射频现象
  • 自动测量包括:信道功率、相邻信道功率比(ACPR)和已占用带宽(OBW)
  • 在射频功率电平触发
  • 触发或自由运行光谱分析
  • 可选串行触发和分析-串行协议触发,解码,并搜索I2C, SPI, USB,以太网,CAN, LIN, FlexRay, RS-232/422/485/UART, MIL-STD-1553,和I2S/LJ/RJ/TDM 10.4 in。(264毫米)明亮的XGA彩色显示屏占地面积小,重量轻-只有5.8英寸。(147毫米)深,11磅(5公斤)Wave Inspector®控制提供简单的导航和自动搜索波形数据

详细信息

Product Description:
The Tektronix MDO4054B-3 Mixed Domain Oscilloscope provides 4 analog channels of 500 MHz bandwidth with a 700 ps rise time. This unit offers an RF channel frequency range from 9 kHz to 3 GHz. Time coordinated analog, digital and RF signal acquisitions are available in this single instrument. Solve complicated design issues quickly and efficiently with an oscilloscope integrated into your design. Observe the frequency domain, and correlate events with the time that domain phenomena caused them. The spectrum shown in the Frequency Domain view is taken from the period of time indicated by the short orange bar in the time domain view – known as the Spectrum Time. With the MDO4054B-3, Spectrum Time can be moved through the acquisition to investigate how the RF spectrum changes over time. And this can be done while the oscilloscope is live and running or on a stopped acquisition.


With traditional oscilloscope FFTs, you can typically either get the desired view of the FFT display, or the desired view of your other time domain signals of interest, but never both at the same time. This is because traditional oscilloscopes only have a single acquisition system with a single set of user settings such as record length, sample rate, and time per division that drive all data views. But with the Tektronix MDO4054B-3, the spectrum analyzer has its own acquisition system that is independent, but time correlated, to the analog and digital channel acquisition systems. This allows each domain to be configured optimally, providing a complete time correlated system view of all analog, digital, and RF signals of interest.


Features:

Mixed-domain analysis
  • Time-correlated analog, digital, and RF signal acquisitions in a single instrument
  • Wave Inspector controls provide easy navigation of time-correlated data from both the time and frequency domains
  • Amplitude, frequency, and phase vs. time waveforms derived from RF input
  • Selectable spectrum time to discover and analyze how RF spectrum changes over time - even on a stopped acquisition


Spectral analysis

  • Dedicated front-panel controls for commonly performed tasks
  • Automated peak markers identify frequency and amplitude of spectrum peaks
  • Manual markers enable non-peak measurements
  • Trace types Include: Normal, Average, Max Hold, and Min Hold
  • Detection types include: +Peak, -Peak, Average, and Sample
  • Spectrogram display enables easy observation and insight into slowly changing RF phenomena
  • Automated measurements include: Channel Power, Adjacent Channel Power Ratio (ACPR), and Occupied Bandwidth (OBW)
  • Trigger on RF power level
  • Triggered or Free Run spectral analysis
  • Optional serial triggering and analysis - serial protocol trigger, decode, and search for I2C, SPI, USB, Ethernet, CAN, LIN, FlexRay, RS-232/422/485/UART, MIL-STD-1553, and I2S/LJ/RJ/TDM 10.4 in. (264 mm) bright XGA color display Small footprint and lightweight - Only 5.8 in. (147 mm) deep and 11 lb. (5 kg)Wave Inspector® Controls provide easy navigation and automated search of waveform data

同类热门仪器

友情推荐

合作客户:

查看更多>>

国产仪器:

查看更多>>

进口仪器:

查看更多>>

校准计量:

查看更多>>

Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有  [粤ICP备14101712号-1] [法律顾问]

公司地址:广东省深圳市南山区西丽街道官龙村华纵科技楼5楼  邮编:518055

在线QQ服务:  服务热线:0755-86016691  电话:13715327187  传真:0755-86641139-816

E-mail:info@wl95.com