您好 欢迎来到晧辰科技!    [登录] [注册]
新闻动态全新仪器资讯论坛
快捷发布产品促销资料中心

所有设备分类

新闻动态

促销信息

产品详情

销售安捷伦 16195B 校准件

浏览次数:490

产品参数

选件 是否计量 发货周期 保修时间 成色
7天 12月 9成新
所在地 机身号 状态 资料下载
深圳市 完好
更新日期:2022-12-06
联系电话:0755-86016691

* 产品描述

产品介绍:
16195B 是用于 4287A 射频 LCR 表或 E4991A 阻抗/材料分析仪的校准套件。使用 16195B 的校准是在 7 mm 连接器平面上执行的。16195B 校准套件包括:开路、短路、50 欧姆负载、低损耗电容器标准。这是系统校准和测试所必需的。
这款电子校准件是校准矢量网络分析仪的理想解决方案。在进行全双端口校准时,它需要的时间和连接次数还不到传统机械校准套件的一半。操作员只需将此电子校准件通过 USB 端口连接至矢量网络分析仪,剩下的工作便可交给固化软件来完成,从而降低了操作员出错的几率。这样做还可以减少连接器的磨损,从而降低测试端口连接器和校准标准件的维修成本。选件 0DC 的校准频率范围低可达到直流,这对于使用是德科技网络分析仪的增强时域分析功能进行宽带器件建模或时域和信号完整性分析非常有利。
 

详细信息

Product Introduction:
The 16195B is a calibration kit for the 4287A RF LCR meter or the E4991A impedance/material analyzer. Calibration using the 16195B was performed on a 7 mm connector plane. The 16195B calibration kit includes: open circuit, short circuit, 50 ohm load, low loss capacitor standard. This is necessary for system calibration and testing.
This electronic calibrator is the ideal solution for calibrating vector network analyzers. It requires less than half the time and connection times of a conventional mechanical calibration kit when performing a full two-port calibration. The operator simply connects the electronic calibration piece to the vector network analyzer via a USB port, and the rest of the work is done by the curing software, reducing the chance of operator error. This also reduces connector wear and tear, which reduces repair costs for test port connectors and calibration standards. Option 0DC is calibrated in a low frequency range up to DC, which is advantageous for wideband device modeling or time-domain and signal integrity analysis using the enhanced time-domain analysis capabilities of the network analyzer.
 

同类热门仪器

友情推荐

合作客户:

查看更多>>

国产仪器:

查看更多>>

进口仪器:

查看更多>>

校准计量:

查看更多>>

Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有  [粤ICP备14101712号-1] [法律顾问]

公司地址:广东省深圳市南山区西丽街道官龙村华纵科技楼5楼  邮编:518055

在线QQ服务:  服务热线:0755-86016691  电话:13715327187  传真:0755-86641139-816

E-mail:info@wl95.com