您好 欢迎来到晧辰科技!    [登录] [注册]
新闻动态全新仪器资讯论坛
快捷发布产品促销资料中心

所有设备分类

新闻动态

促销信息

产品详情

求购泰克 80C03-CR 光学采样模块

浏览次数:464

紧急求购,资金齐备,坐等发货

产品参数

选件 保修时间 状态 是否计量
CR 不保修 完好
成色 发货周期 所在地 数量
8成新 -- 深圳市 1
预算价格: 电议
更新日期:2022-02-25
联系电话:0755-86016691

*产品描述

附加功能:

  • 选件CR–1.063、1.250,2.488和2.500 GHz时钟恢复
  • 2.5 GHz光纤带宽
  • 输入通道数:1
  • 有效波长范围:700 nm至1650 nm
  • 校准波长:780 nm,850 nm,1310 nm和1550 nm
  • 绝对最大无损光学输入:无损光学输入,在具有最高相对响应度的波长下,峰值功率为10 mW
  • 内部光纤直径:62.5 µm / 125 µm多模
  • 光学回波损耗:> 14 dB(62.5 µm多模),> 24 dB(9 µm单模)
  • 最小光带宽:> 2.3 GHz(2.5 GHz,典型值)
  • 接受光纤输入:单模或多模
  • RMS光学噪声:典型值:<.75 µW,1.0625 Gb / s,1.2500 Gb / s,<1 µW 2.48832 Gb / s
  • 最大值:<1 µW,1.0625 Gb / s,1.2500 Gb / s,<1.5 µW 2.48832 Gb / s
  • 独立通道偏移校正:标准
  • 模块前部的偏移能力:标准
  • 可切换滤波器设计
  • 接受单模或多模光纤输入
  • 放大设计
  • 光电转换器
  • 平均功率监控器
  • 一个或多个参考接收机滤波器
  • 全带宽光路
  • 低噪声电子采样器
  • 通用光纤输入连接器

功率计

  • 功率范围:+4 dBm至–30 dBm
  • 分辨率:1%

应用领域

  • 高速光通讯
  • 测试中
  • 消光比和Q因子
  • 测量
  • 眼图和脉冲形状分析
  • 弛豫振荡测试
  • 光信号分析

配有一个或多个光学采样模块的Tektronix 8000系列采样示波器为电信(622 Mb / s至9.953 Gb / s)或Datacom(光纤通道和千兆以太网)应用以及通用光学组件测试提供了完整的光学测试解决方案。 。每个光学模块均包含光学测试所需的所有元素。

多速率,高灵敏度数据通信采样模块

80C03-CR模块支持在1.063、1.250和2.488 Mb / s的短波长和长波长(700-1650 nm)信号的波形一致性测试,以及高达2.3 GHz光学带宽的通用测试。

其放大的光电转换器设计使用户能够检查非常低电平的光信号。

80C03-CR可选配置时钟恢复(Opt。CR),支持光纤通道1063(1.063 Gb / s),千兆以太网(1.250 Gb / s)和OC48 / STM16(2.488 Gb / s)标准。

其他要求

Additional Features:

  • Option CR–1.063, 1.250, 2.488 and 2.500 GHz clock recovery
  • 2.5 GHz Optical Bandwidth
  • Number of input channels: 1
  • Effective wavelength range: 700 nm to 1650 nm
  • Calibrated wavelengths: 780 nm, 850 nm, 1310 nm, and 1550 nm
  • Absolute maximum non-destructive optical input: non-destructive optical input 10 mW peak power at wavelength with highest relative responsivity
  • Internal fiber diameter:  62.5 µm/125 µm multi-mode
  • Optical return loss: >14 dB (62.5 µm multi-mode), >24 dB (9 µm single mode)
  • Minimum optical bandwidth:  >2.3 GHz (2.5 GHz, typical)
  • Fiber input accepted: single- or multi-mode
  • RMS Optical Noise: Typical: <.75 µW, 1.0625 Gb/s, 1.2500 Gb/s, <1 µW 2.48832 Gb/s
  • Max.: <1 µW, 1.0625 Gb/s, 1.2500 Gb/s, <1.5 µW 2.48832 Gb/s
  • Independent channel deskew: Standard
  • Offset capability at front of module: Standard
  • Switchable Filter Design
  • Accepts Either Single-mode or Multi-mode Fiber Input
  • Amplified Design
  • Optical to electrical converter
  • Average power monitor
  • One or more reference receiver filters
  • A Full bandwidth optical path
  • A low-noise electrical sampler
  • Universal optical input connector

Power meter

  • Power Range: +4 dBm to –30 dBm
  • Resolution: 1%

Applications

  • High-Speed Optical Communications
  • Testing
  • Extinction Ratio and Q-Factor
  • Measurements
  • Eye-Pattern and Pulse Shape Analysis
  • Relaxation Oscillation Testing
  • Optical Signal Analysis

The Tektronix 8000 Series Sampling Oscilloscopes configured with one or more Optical Sampling Modules provide complete optical test solutions for Telecom (622 Mb/s to 9.953 Gb/s) or Datacom (FibreChannel and Gigabit Ethernet) applications, as well as general purpose optical component testing. Each optical module includes all of the elements necessary for optical testing.

Multi-Rate, High Sensitivity Datacom Sampling Module

The 80C03-CR module supports waveform compliance testing of both short and long wavelength (700-1650 nm) signals at 1.063, 1.250, and 2.488 Mb/s, as well as general purpose testing with up to 2.3 GHz optical bandwidth.

Its amplified optical to electrical converter design enables the user to examine very low level optical signals.

The 80C03-CR is optionally configured with clock recovery (Opt. CR) that supports Fibre Channel 1063 (1.063 Gb/s), Gigabit Ethernet (1.250 Gb/s) and OC48/STM16 (2.488 Gb/s) standards.

同类热门仪器

友情推荐

合作客户:

查看更多>>

国产仪器:

查看更多>>

进口仪器:

查看更多>>

校准计量:

查看更多>>

Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有  [粤ICP备14101712号-1] [法律顾问]

公司地址:广东省深圳市南山区西丽街道官龙村华纵科技楼5楼  邮编:518055

在线QQ服务:  服务热线:0755-86016691  电话:13715327187  传真:0755-86641139-816

E-mail:info@wl95.com

//多图全屏展示