描述：
BERTWave MP2110A是一款具有内置误码率测试仪（BERT）和采样示波器的多合一测量仪器，支持对光模块的评估，例如误码率（BER）测量，眼图分析等。
BERT和采样示波器是评估光通信系统使用的光模块所需的仪器。到目前为止，对典型光模块（例如QSFP28和SFP28）的评估需要一个独立的BERT和采样示波器，但是由于采用了一个内置的4通道BERT和4通道采样示波器，BERTWave MP2110A消除了对分开的工具，同时降低了工具的资本成本和制造成本。
此外，BERTWave MP2110A可以在光学模块RX端同时测量高达4ch的误码率（BER），并在Tx端同时进行高达2ch的眼图模板测试和眼图分析。此外，MP2110A采样示波器的采样速度高达250 ksamples / s（比上一代仪器快6倍），可实现更快的眼罩测试和眼图分析。支持同时进行BER测量和眼图分析，支持NRZ信号模板余量测量和抖动分析。还可以分析PAM4信号，并支持高达53 Gbaud的TDECQ测量。BERTWave MP2110A最多可缩短65％的测量时间。
通过安装选件093，MP2110A BERT在标准配置中测量的比特率从24.3 Gbit / s到28.2 Gbit / s，从9.5 Gbit / s到14.2 Gbit / s。内置采样示波器支持40 GHz的带宽（电I / F），35 GHz（SMF，光纤I / F）和25 GHz（MMF，光纤I / F）。此外，采样示波器具有内置的100 Gbit / s频带贝塞尔滤波器作为标准，用于测量光信号。这种出色的性能有助于确保更高的光学模块制造良率。
此外，简化的设置和易于使用的用户界面使MP2110A易于操作。与MP2100B远程命令的向后兼容性可确保无故障升级仪器。
此外，内置PC带来的稳定运行可确保性能不受操作环境的影响。
借助多通道BERT，采样示波器，高速眼图分析和模板余量测量，BERTWave MP2110A可以提高光模块的生产效率，从而降低制造成本。
用于100/200 / 400G多通道光模块/设备研发与制造
The BERTWave MP2110A is an all-in-one measuring instrument with built-in bit error rate tester (BERT) and sampling oscilloscope, supporting evaluations such as bit error rate (BER) measurements, Eye pattern analyses, etc., of optical modules.
The BERT and sampling oscilloscope are required instruments for evaluating optical modules used by optical communications systems. Until now, the evaluation of typical optical modules, such as QSFP28 and SFP28, has required a standalone BERT and sampling oscilloscope, but with an all-in-one built-in 4ch BERT and 4ch sampling oscilloscope, the BERTWave MP2110A eliminates the need for separate instruments, slashing both instrument capital costs and manufacturing costs.
Moreover, the BERTWave MP2110A can simultaneously measure the bit error rate (BER) for up to 4ch at the optical module RX side, as well as simultaneously perform Eye Mask tests and Eye pattern analyses for up to 2ch at the Tx side. In addition, the MP2110A sampling oscilloscope has a sampling speed of up to 250 ksamples/s (six times faster than previous generation instruments) for faster Eye Mask tests and Eye pattern analyses. With support for simultaneous BER measurements and Eye pattern analyses, NRZ-signal Mask Margin measurement and Jitter analysis are supported. PAM4 signals can also be analyzed and TDECQ measurement up to 53 Gbaud is supported. The BERTWave MP2110A slashes measurement times by up to 65%.
The MP2110A BERT measures bit rates from 24.3 Gbit/s to 28.2 Gbit/s in the standard configuration and from 9.5 Gbit/s to 14.2 Gbit/s by installing Option 093. The built-in sampling oscilloscope supports bandwidths of 40 GHz (electrical I/F), 35 GHz (SMF, optical I/F), and 25 GHz (MMF, optical I/F). In addition, the sampling oscilloscope has a built-in 100-Gbit/s band Bessel filter as standard for measuring optical signals. This excellent performance helps secure higher optical module manufacturing yields.
Moreover, the simplified settings and easy user interface make the MP2110A easy to operate; backwards compatibility with MP2100B remote commands assures trouble-free instrument upgrades.
Additionally, the stable operation resulting from the built-in PC guarantees performance irrespective of the operation environment.
With multi-channel BERT, sampling oscilloscope, high-speed Eye pattern analyses, and Mask Margin measurements, the BERTWave MP2110A improves optical module production efficiency to slash manufacturing costs.
For 100/200/400G Multichannel Optical Module/Device R&D and Manufacturing
Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有 [粤ICP备14101712号-1] [法律顾问]
公司地址：广东省深圳市南山区西丽街道官龙村华纵科技楼5楼 邮编：518055
在线QQ服务：
服务热线：0755－86016691 电话：13715327187 传真：0755-86641139-816
E-mail：info@wl95.com
