描述:
Aim-TTi的TGR6000是一款经济的RF信号发生器,可以产生10MHz至6GHz的高质量信号。为了降低成本,已将调制功能排除在设计之外,因此它适用于CW(载波)情况。
TGR6000提供的信号具有低相位噪声,低残留FM和杂散信号。具有1ppm的内置时基稳定性,可以将其锁定到外部频率作为更高精度的参考。振幅和频率扫描可以在TGR6000指定输出的整个范围内执行。可以将其设置为执行三种扫描类型:步进,连续线性/对数和列表。使用列表扫描,最多可以预定义1000个点,并为每个点指定频率,电平和停留时间。
当获得稳定的输出时,后面板上的“ SYNC”可用输出有用。用户可以选择为高电平有效或低电平有效。此外,另一个有用的功能是输出幅度可以遵循预设的TRIM功能,以补偿不均匀的外部设备频率响应。TRIM功能是用户设置列表,最多包含100个幅度调整/频率对。TGR6000还具有用于12种仪器设置和多达16个扫描列表的非易失性存储位置,并且可以通过LAN,USB,RS232或GPIB进行远程控制。
特征:
Description:
Aim-TTi’s TGR6000 is an economical RF signal generator that can produce high quality signal from 10MHz to 6GHz. Modulation capabilities have been excluded from the design to keep costs down, so it is intended for CW (carrier wave) situations.
The TGR6000 provides signals with low phase noise and low residual FM and spurious artifacts. With a built-in time-base of 1ppm stability, it can be locked to an external frequency as a reference for even higher precision. Amplitude as well frequency sweeps can be performed over the complete range of the TGR6000’s specified output. It can be set to perform three sweep types: step, continuous lin/log, and list. With List Sweep, up to 1000 points can be pre-defined, with the frequency, level and dwell time specified for each.
A useful output available on the rear panel “SYNC” marks when a stable output has been achieved. It can be user-selected as active high or low. Additionally, another useful feature is that the output amplitude can follow a preset TRIM function to compensate for a non-uniform external equipment frequency response. The TRIM function is a user –set list of as many as 100 amplitude adjustment /frequency pairs. The TGR6000 also features non-volatile storage locations for 12 instrument setups and up to 16 sweep lists, and it can be remotely controlled via LAN, USB, RS232 or GPIB.
Features:
Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有 [粤ICP备14101712号-1] [法律顾问]
公司地址:广东省深圳市南山区西丽街道官龙村华纵科技楼5楼 邮编:518055
在线QQ服务: 服务热线:0755-86016691 电话:13715327187 传真:0755-86641139-816
E-mail:info@wl95.com