浏览次数：1453
| 选件 | 是否计量 | 发货周期 | 保修时间 | 成色 |
|---|---|---|---|---|
| 否 | 1-4周 | 12- | 全新 | |
| 所在地 | 机身号 | 状态 | 资料下载 | |
| 深圳市 | 完好 |
6332C光插回损测试仪内置高稳定度光源，可实时测试光传输系统中光纤光缆、光器件和光设备的插入损耗和回波损耗，具有稳定单模和多模光源输出以及光功率计功能，支持单波长和双波长插回损测试。产品具有可视红光故障定位功能，可快速定位光纤断点位置；可以存储各类参数，避免每次测试前重复设置，简化测试过程；可以设定待测产品阈值参数，根据测试结果不同颜色显示或者声音提示快速判断待测产品是否合格；可以保存测试结果，方便后续数据处理。产品接头易于清洁和更换，广泛应用于光纤通信科研、教学和生产领域
具有稳定光源和光功率计功能
具有可视红光故障定位功能
测试速度快
插损和回损同时测试，波长自动同步设定
快速判断待测产品是否合格
光功率计接口易于更换和清洁
具有稳定光源和光功率计功能
6332C除用于测试插入损耗和回波损耗外，同时还可作为稳定光源和光功率计使用。光源有无光，连续光，内调制（270Hz，1kHz和2kHz）和外调制输出模式，光功率计支持线性和非线性显示，可适应FC，SC，ST，LC，2.5mm通用和1.25mm通用等接口类型。
具有可视红光故障定位功能
6332C配有红光功能，可实现光纤故障点位置的快速判断，或者用于多芯光缆、带状光纤等的芯线对照。
测试速度快
6332C采用主频高的处理器，同时提供了各类参数存储功能，再次开机，仪器直接调用上次关机前保存的校准参数，无需再次进行设置，简化了测试步骤。
插损和回损同时测试，波长自动同步设定
6332C具有插回损同时测试模式，经过参考测试和回损定标后，接入待测件，仪器界面会同时显示被测件的插入损耗和回波损耗值，在该模式下，光功率计可自动设定与光源的输出波长一致。用户可根据需要，选择单波长或者双波长插回损测试。
快速判断待测产品是否合格
6332C具有插入损耗和回波损耗阈值参数设定功能，用户可根据情况进行设定，合格产品的测试结果的颜色为蓝色，同时蜂鸣器会有响声，反之，结果为红色，蜂鸣器不响。
光功率计接口易于更换和清洁
6332C光功率计接口支持多种连接方式，除配备标准FC接口形式外，可选SC，ST，LC，2.5mm通用和1.25mm通用类型，用户可根据需要自行拆卸更换，拆卸简单，易于清洁。
The 6332C optical insertion return loss tester has a built-in high stability light source, which can test the insertion loss and return loss of fiber optic cables, optical devices and optical equipment in the optical transmission system in real time. It has stable single-mode and multi-mode light source output and optical power meter functions. Support single wavelength and dual wavelength insertion loss test. The product has a visible red light fault location function, which can quickly locate the position of the fiber breakpoint; various types of parameters can be stored to avoid repeated settings before each test, simplifying the test process; the threshold parameters of the product to be tested can be set, and different colors can be used according to the test results Display or sound prompt to quickly judge whether the product to be tested is qualified; the test results can be saved to facilitate subsequent data processing. The product connector is easy to clean and replace, and is widely used in the field of optical fiber communication research, teaching and production.
With stable light source and optical power meter function
With visible red light fault location function
Fast test speed
Simultaneous testing of insertion loss and return loss, automatic synchronization of wavelength setting
Quickly judge whether the product to be tested is qualified
Optical power meter interface is easy to replace and clean
With stable light source and optical power meter function
In addition to testing insertion loss and return loss, the 6332C can also be used as a stable light source and optical power meter. The light source has no light, continuous light, internal modulation (270Hz, 1kHz and 2kHz) and external modulation output mode. The optical power meter supports linear and nonlinear display, which can be adapted to FC, SC, ST, LC, 2.5mm universal and 1.25mm universal And other interface types.
With visible red light fault location function
The 6332C is equipped with a red light function, which can realize the fast judgment of the location of the fiber fault point, or used for the core wire comparison of multi-core optical cables and ribbon fibers.
Fast test speed
The 6332C uses a processor with a high frequency and provides various parameter storage functions. When it is turned on again, the instrument directly recalls the calibration parameters saved before the last shutdown without setting again, simplifying the test procedure.
Simultaneous testing of insertion loss and return loss, automatic synchronization of wavelength setting
The 6332C has a simultaneous insertion and return loss test mode. After the reference test and return loss calibration, it is connected to the DUT. The instrument interface will display the insertion loss and return loss values of the DUT at the same time. In this mode, the optical power meter It can be automatically set to be consistent with the output wavelength of the light source. Users can choose single-wavelength or dual-wavelength insertion loss test according to their needs.
Quickly judge whether the product to be tested is qualified
6332C has the function of setting the threshold parameters of insertion loss and return loss, the user can set according to the situation, the color of the test result of the qualified product is blue, and the buzzer will sound, otherwise, the result is red, the buzzer Not ringing.
Optical power meter interface is easy to replace and clean
The 6332C optical power meter interface supports a variety of connection methods. In addition to the standard FC interface, SC, ST, LC, 2.5mm universal and 1.25mm universal types are available. Users can disassemble and replace them as needed. The disassembly is simple and easy to clean.
Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有 [粤ICP备14101712号-1] [法律顾问]
公司地址：广东省深圳市南山区西丽街道官龙村华纵科技楼5楼 邮编：518055
在线QQ服务：
服务热线：0755－86016691 电话：13715327187 传真：0755-86641139-816
E-mail：info@wl95.com
