浏览次数:1292
选件 | 是否计量 | 发货周期 | 保修时间 | 成色 |
---|---|---|---|---|
400/660MHz | 否 | 3天 | 12月 | 8成新 |
所在地 | 机身号 | 状态 | 资料下载 | |
深圳市 | 完好 |
带有1或2个Keysight 81131A输出模块的Keysight 81130A是具有400 MHz精度的单通道或双通道脉冲数据发生器。
凭借1或2个Keysight 81132A输出模块,Keysight 81130A甚至可成为精度达600 MHz/1.32 Gbps的单通道或双通道脉冲数据发生器。
81130A可提供先进的延迟,并且由于具有PLL振荡器,其脉冲宽度精度超过了81110A的水平。但是请注意,这种高精度的振荡器是不可触发的。相对于81110A,81130A可提供较大的、可分段的内存(64 kbit)。其可计数的循环和序列PRBS特性可为串行数据请求(例如,数据通信信息和初始化例程)提供全面的灵活性。双通道可以是EXORed(即内部添加)。4个独立的定时边沿组合到一起,允许在单一信号中支持任意波形的脉冲。
视输出模块的类型,脉冲的跳变沿可以是可选则的(对于81131A 为800 ps或1.6 ns)或500 ps的固定模式(81132A)。源阻抗为50欧姆,阻抗中的输出电压分别为3.8 Vpp(81131A)和2.5 Vpp(81132A)。
注:
81131A和81132A输出模块可与单台81130A或每个81130A 400/660 MHz / 1.32Gbit/s单通道或双通道脉冲数据发生器结合使用。
通道脉冲数据发生器要求具备下列1-2条输出通道:
- Keysight 81131A 400 MHz,3.8 V,50 Ohm至50 Ohm
- Keysight 81132A 660 MHz,2.5 V,50 Ohm至50 Ohm
注:只能添加具有相同模块号的输出模块。不能将Keysight 81131A和Keysight 81132A结合在同一台81130A上使用。
The Agilent 81101A, 81104A, 81110A and 81130A generate all the standard pulses and digital patterns needed to test current logic technologies (CMOS, TTL, LVDS, ECL, etc.).
With the optional second channel on all of the models from 80 MHz, multi-level and multi-timing signals can be obtained using the internal channel addition feature.
Variable pulse parameters in pattern mode as well as in pulse mode (not on the 81130A).
Synchronously triggerable. Simulation of reflections/ distortions (81104A, 81110A). Three/four-level codes (81104A, 81110A). Glitch-free timing changes.
Now you can sweep your timing values without the danger of spurious pulses or dropouts that could cause measurement errors. (Applies to continuous mode, values < 100 ms, consecutive values between 0.5 and twice the previous value on the 81101A, 81104A, 81110A).
All models provide clean, accurate pulses with excellent repeatability, thus contributing to measurement integrity.
The Agilent 81110A features self calibration for more accuracy. It also offers a choice of output modules: the Agilent 81111A 165 MHz, 10 V module with variable transitions and the Agilent 81112A 330MHz, 3.8 V module which has differential outputs and two selectable transition times.
The Agilent 81130A offers a choice of output modules: the Agilent 81131A 400 MHz, 3.8 V module and the Agilent 81132A 660 MHz, 2.5 V module which has complementary outputs.
Features such as the clear graphical display, autoset, help, store/recall, preset TTL/ECL levels, selectable units (such as current/voltage, width/duty-cycle), and load compensation ensure a high level of convenience.
The Agilent 81100A family can be integrated easily into all phases of test system development. Test programs are 100% upwardly compatible from the Agilent 81101A to the 81104A and from the 81104A to the 81110A, ensuring that growth with future needs is as easy as just exchanging the instruments physically. This results in low integration costs, in addition to low costs of ownership through proven hardware reliability.
Todays devices can require very complex stimuli. To meet this, the Agilent 81130A can sequence and loop its memory for very deep patterns. RZ (return-to-zero), NRZ (non-return-to- zero) and R1 (return-to-one) formats are available.
Digital channel addition allows the generation of signals with two different pulse widths and delays or of data rates up to 1.32 Gbit/s in one single channel.
The Agilent 81130A is designed and recommended for an operation in the frequency range of 170 kHz to 400/660 MHz. However it can be operated in the extended range down to 1 kHz.
Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有 [粤ICP备14101712号-1] [法律顾问]
公司地址:广东省深圳市南山区西丽街道官龙村华纵科技楼5楼 邮编:518055
在线QQ服务: 服务热线:0755-86016691 电话:13715327187 传真:0755-86641139-816
E-mail:info@wl95.com