您好 欢迎来到晧辰科技!    [登录] [注册]
新闻动态全新仪器资讯论坛
快捷发布产品促销资料中心

所有设备分类

新闻动态

促销信息

产品详情

销售泰克 DSA8300 示波器

浏览次数:3856

晧辰自营,品质保证,配送快捷

产品参数

选件 是否计量 发货周期 保修时间 成色
1-4周 12天 8成新
所在地 机身号 状态 资料下载
深圳市 完好
更新日期:2021-07-31
联系电话:0755-86016691

* 产品描述

总览:

DSA8300是最新的等效时间采样示波器,可为通信信号分析,串行数据网络分析和串行数据链路分析应用提供最高的保真度测量和分析功能。

给欧盟客户的通知

本产品未更新为符合RoHS 2指令2011/65 / EU的规定,因此不会运往欧盟。客户可以从2017年7月22日之前投放到欧盟市场的库存中购买产品,直到耗竭为止。泰克致力于帮助您满足解决方案的需求。请联系您当地的销售代表以获取进一步的帮助,或确定是否有其他替代产品。泰克将继续提供服务,直至全球支持寿命终止。

关键性能指标
  • 低时基抖动:
    • 在多达8个同时采集的通道上典型值为425 fs
    • 使用82A04B相参考模块在最多6个通道上<100 fs
  • 业界最高的垂直分辨率– 16位A / D
  • 电气分辨率:<20 µV LSB(对于1 v整个范围)
  • 光学分辨率从80C07B(整个范围1 mW)<20 nW到80C10C(整个范围30 mW)<0.6 µW
  • 光学带宽大于80 GHz
  • 电气带宽大于70 GHz
  • NRZ,RZ和脉冲信号类型的120多种自动测量
  • 超过80种行业标准口罩的自动口罩测试
  • 复杂的抖动/噪声/ BER / SER分析(80SJNB),支持复杂的测量TDECQ 1,SNDR 2(应用程序)

1 PAM4的发射器和色散闭眼四元级。

2信噪比和失真比。

主要特点

各种各样的光学,电气和附件模块可满足您的特定测试要求。

  • 光模块
    • 支持50G / 100G / 200G / 400G的155 Mb / s至10 Gb / s至40 Gb / s至100 Gb / s至PAM4的光数据速率的光模块
    • 光学参考接收机(ORR)1支持标准要求的一致性测试的特定要求
    • 光学采样模块的高光学灵敏度,低噪声和宽动态范围可实现对长距离光通信标准的短距离的准确测试和表征
    • 完全校准的时钟恢复解决方案–无需手动校准数据提取损失
    • 校准的消光比测量和可变校正ER测量可确保准确性和可重复性
  • 电气模块
    • 极低噪声的电气采样器(典型值为20 GHz时为280μV,典型值为60 GHz时为450μV)
    • 可选带宽2使用户可以权衡采样器带宽和噪声,以获得最佳数据采集性能
    • 远程采样器或紧凑的采样扩展器模块电缆允许采样器紧靠被测设备放置,从而最大程度地降低了信号衰减
    • 高性能集成TDR(典型的10 ps逐步上升时间)支持出色的阻抗不连续性表征和高动态范围,适用于50 GHz S参数测量
  • 分析
    • 从<1 GBd到60 GBd的高速PAM4和PAM2 NRZ串行数据速率的抖动,噪声和BER分析,可深入了解闭眼的确切原因
    • 通过对每个PAM眼进行全面的抖动,噪声和BER分析,以及一组评估整体PAM4信号属性的全局测量,对PAM4信号进行分析

    • 100G-SR4 /发射器和色散闭眼器(TDEC)自动化功能为SR4短距离以太网提供了钥匙测试和调试TX光学特性的关键
    • 80STDEC简化了高性能发射器和色散眼图闭合(TDEC)测量,使其非常适合制造和一致性验证应用
    • 使用80多种行业标准的口罩进行自动口罩测试。可以将新的口罩导入DSA8300,以支持新的新兴标准。用户可以定义自己的口罩以进行自动口罩测试
    • 通过80SJNB Essentials和高级软件应用程序选件提供了抖动,噪声,BER,模板测试和串行数据链路分析(SDLA)。
    • 高级TDR分析,S参数测量,仿真模型提取和串行链路仿真功能是通过将iConnect提供®软件应用选项
    • 400G-M4光学制造分析软件提供了光发射器和色散眼图闭合四级(TDECQ)分析
  • 高测试通量
    • 高采样率,每通道高达200 kS / s
    • 高效的编程接口(IEEE-488,以太网或本地处理器访问)可实现高测试吞吐量

1光学参考接收器(ORR)是4阶Bessel-Thompson滤波器,具有标准定义的频率响应和容差。泰克优化了响应,以获得最佳的标称配合和最高质量的面罩测试结果。

2有关每个可用模块的详细说明,请参见80E00电气采样模块数据表。

应用领域
  • 电信和数据通信组件与系统的设计/验证
  • 符合ITU / ANSI / IEEE / SONET / SDH的制造/测试
  • 高性能真差TDR测量
  • 包括S参数在内的串行数据应用的阻抗表征和网络分析
  • 先进的抖动,噪声,BER和SDLA分析
  • 使用IConnect进行通道和眼图仿真以及基于测量的建模。

卓越的性能和非凡的多功能性

DSA8300数字串行分析器是用于开发和测试使用千兆位数据传输的通信,计算机和消费类电子产品的最通用的工具。它用于光学和电子发射器特性分析,以及这些产品中使用的设备,模块和系统的符合性验证。

此外,DSA8300非常适合用于电气信号路径检定,无论是用于封装,PCB还是电缆。DSA8300具有出色的带宽,信号保真度和最可扩展的模块化架构,可为当前和新兴的串行数据技术提供最高性能的TDR和互连分析,最准确的信号损伤分析以及BER计算。

详细信息

The DSA8300 is a state-of-the-art Equivalent Time Sampling Oscilloscope that provides the highest fidelity measurement and analysis capabilities for Communications Signal Analysis, Serial Data Network Analysis, and Serial Data Link Analysis applications.

Notice to EU customers

This product is not updated to comply with the RoHS 2 Directive 2011/65/EU and will not be shipped to the EU. Customers may be able to purchase products from inventory that were placed on the EU market prior to July 22, 2017 until supplies are depleted. Tektronix is committed to helping you with your solution needs. Please contact your local sales representative for further assistance or to determine if alternative product(s) are available. Tektronix will continue service to the end of worldwide support life.

Key performance specifications
  • Low time base jitter:
    • 425 fs typical on up to 8 simultaneously acquired channels
    • <100 fs on up to 6 channels with 82A04B phase reference module
  • Industry’s highest vertical resolution – 16 bit A/D
  • Electrical resolution: <20 µV LSB (for 1 v full range)
  • Optical resolution from <20 nW for the 80C07B (1 mW full range) to <0.6 µW for the 80C10C (30 mW full range)
  • Optical bandwidths to >80 GHz
  • Electrical bandwidths to >70 GHz
  • Over 120 automated measurements for NRZ, RZ, and pulse signal types
  • Automated mask testing with over 80 industry-standard masks
  • Complex jitter/noise/BER/SER analysis (80SJNB), support for complex measurements TDECQ 1, SNDR 2 (applications)

1Transmitter and Dispersion Eye Closure Quaternary for PAM4.

2Signal-to-Noise-and-Distortion Ratio.

Key features

A wide variety of optical, electrical, and accessory modules support your specific testing requirements.

  • Optical modules
    • Optical modules that support optical data rates from 155 Mb/s to 10 Gb/s to 40 Gb/s to 100 Gb/s to PAM4 for 50G/100G/200G/400G
    • Optical reference receivers (ORR) 1 support specified requirements for standards-mandated compliance testing
    • High optical sensitivity, low noise, and wide dynamic range of the optical sampling modules allows accurate testing and characterization of short-reach to long-haul optical communications standards
    • Fully calibrated clock recovery solutions – no need to manually calibrate for data pick-off losses
    • Calibrated extinction ratio measurements and variable correction ER measurement ensure accuracy and repeatability
  • Electrical modules
    • Very low-noise electrical samplers (280 μV at 20 GHz, 450 μV at 60 GHz, typical)
    • Selectable bandwidths 2 allow the user to trade-off sampler bandwidth and noise for optimal data acquisition performance
    • Remote samplers or compact sampling extender module cables minimize signal degradation by allowing the sampler to be located in close proximity to the device under test
    • High-performance integrated TDR (10 ps typical step rise time) supports exceptional impedance discontinuity characterization and high dynamic range for S-parameter measurements to 50 GHz
  • Analysis
    • Jitter, noise, and BER analysis of high-speed PAM4 and PAM2 NRZ serial data rates from <1 GBd to 60 GBd provides insight into precise causes of eye closure
    • Analysis of PAM4 signals with comprehensive jitter, noise and BER analysis for each individual PAM eye, and a set of global measurements that assess the overall PAM4 signal attributes

    • 100G-SR4/Transmitter and Dispersion Eye Closure (TDEC) automation provides turn-key testing and debug of TX Optical properties key to the SR4 Short Reach Ethernet
    • 80STDEC streamlines high performance Transmitter and Dispersion Eye Closure (TDEC) measurement making it ideal for manufacturing and conformance validation applications
    • Automated mask testing with over 80 industry-standard masks. New masks can be imported into the DSA8300 to support new emerging standards. Users can define their own masks for automated mask testing
    • Jitter, noise, BER, mask testing, and Serial Data Link Analysis (SDLA) are provided through the 80SJNB Essentials and Advanced Software Application Options
    • Advanced TDR analysis, S-parameter measurements, simulation model extraction, and serial link simulation capabilities are provided by the IConnect® Software Application options
    • 400G-M4 Optical Manufacturing Analysis Software provides Optical Transmitter and Dispersion Eye Closure Quaternary (TDECQ) analysis
  • High test throughput
    • High sample acquisition rate up to 200 kS/s per channel
    • Efficient programmatic interface (IEEE-488, Ethernet, or local processor access) enables high test throughput

1Optical Reference Receiver (ORR) is a 4th-order Bessel-Thompson filter, with a frequency response and tolerances as defined by the standards. Tektronix optimizes the response for best nominal fit and highest quality mask test results.

2Refer to the 80E00 Electrical Sampling Modules datasheet for detailed descriptions of each available module.

Applications
  • Design/Verification of telecom and datacom components and systems
  • Manufacturing/testing for ITU/ANSI/IEEE/SONET/SDH compliance
  • High-performance true-differential TDR measurements
  • Impedance characterization and network analysis for serial data applications including S-parameters
  • Advanced jitter, noise, BER and SDLA analysis
  • Channel and eye diagram simulation and measurement-based modeling with IConnect.

Superior performance with extraordinary versatility

The DSA8300 Digital Serial Analyzer is the most versatile tool for developing and testing communications, computers, and consumer electronics which use multi-gigabit data transmission. It is used for optical and electrical transmitter characterization, as well as compliance verification for devices, modules, and systems used in these products.

In addition, the DSA8300 is well-suited for electrical signal path characterization, whether for packages, PCBs, or electrical cables. With exceptional bandwidth, signal fidelity, and the most extensible modular architecture, the DSA8300 provides the highest-performance TDR and interconnect analysis, most accurate analysis of signal impairments, and BER calculations for current and emerging serial data technology.

同类热门仪器

友情推荐

合作客户:

查看更多>>

国产仪器:

查看更多>>

进口仪器:

查看更多>>

校准计量:

查看更多>>

Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有  [粤ICP备14101712号-1] [法律顾问]

公司地址:广东省深圳市南山区西丽街道官龙村华纵科技楼5楼  邮编:518055

在线QQ服务:  服务热线:0755-86016691  电话:13715327187  传真:0755-86641139-816

E-mail:info@wl95.com