特点:
最高可在110 V,3.2 A和60 W的电压下进行带电源操作(电流源)和灌电流操作(灌电流)的四维操作。
输出和测量分辨率为5.5位。
电压产生/测量范围:200 mV至110 V
电流产生/测量范围:20 µA至3.2 A
最大输出电流:
±3.2 A和(在±12 V或更低的输出电压下)
±2 A(在输出电压下) ±30 V以下)
±1 A(在±60 V以下的输出电压下)
±0.5 A(在±110 V以下的输出电压下)
GS610由恒定电流源,恒定电压源,电压表和电流表组成。每个功能可以组合成多种操作模式。
操作方式:
另外,通过在内部切换本地感测和远程感测,可以使用两线制或四线制进行控制和测量。
多种操作模式
GS610的电压/电流生成模块以DC生成模式或脉冲生成模式运行。每种生成模式都提供四种操作模式-连续输出,线性扫描,对数扫描和程序扫描。在程序扫描模式下,用户可以定义任意扫描模式。在每种扫描模式下,输出电平至少可以以100 µs的间隔更改。
直流输出模式
脉冲输出方式
Feature:
Four-dimensional operation with source operation (current source) and sink operation (current sink) is possible at up to 110 V, 3.2 A, and 60 W.
The output and measurement resolutions are 5.5 digits.
Voltage generation/measurement range: 200 mV to 110 V
Current generation/measurement range: 20 µA to 3.2 A
Maximum output current:
±3.2 A & (at an output voltage of ±12 V or less)
±2 A (at an output voltage of ±30 V or less)
±1 A (at an output voltage of ±60 V or less)
±0.5 A (at an output voltage of ±110 V or less)
The GS610 is made up of a constant current source, a constant voltage source, a voltmeter, and an ammeter. Each function can be combined into numerous operation modes.
Operation modes:
Additionally, control and measurement using a two-wire system or a four-wire system are possible by switching local sensing and remote sensing internally.
Various Operation Modes
The voltage/current generation block of the GS610 operates in DC generation mode or pulse generation mode. Four operation modes-continuous output, linear sweep, log sweep, and program sweep-are available for each generation mode. In program sweep mode, the user can define an arbitrary sweep pattern. The output level can be changed at a minimum of 100 µs intervals in each sweep mode.
DC output mode
Pulse output mode
Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有 [粤ICP备14101712号-1] [法律顾问]
公司地址:广东省深圳市南山区西丽街道官龙村华纵科技楼5楼 邮编:518055
在线QQ服务: 服务热线:0755-86016691 电话:13715327187 传真:0755-86641139-816
E-mail:info@wl95.com