产品介绍:
Differential active probes provide truer signal reproduction and fidelity for high-frequency measurements. With ultra-low input capacitance and versatile device-under-test connection capabilities, the TDP1500 and TDP3500 Differential-ended Active probes provide excellent high-speed electrical and mechanical performance required for today’s digital system designs.
Specifically designed for use and direct connection to the TekVPI™ probe interface used on the DPO7000, DPO4000, and MSO4000 Series oscilloscopes, the TDP1500 and TDP3500 Differential probes achieve high-speed signal acquisition and measurement fidelity by solving three traditional problems:
技术规格:
CharacteristicDescription
Bandwidth (Probe only) |
≥1.5 GHz warranted (TDP1500) ≥3.5 GHz warranted (TDP3500) |
Attenuation (Probe only) |
1x/10x (TDP1500) 5x (TDP3500) |
Rise Time (Probe only) |
≤265 ps typical (TDP1500) ≤110 ps typical (TDP3500) |
Differential Input Capacitance |
≤1 pF (TDP1500) ≤0.3 pF (TDP3500) |
Differential Input Resistance |
200 k? (TDP1500) 100 k? (TDP3500) |
Differential Input Dynamic Range |
±8.5 V (10x) (TDP1500) ±850 mV (1x) (TDP1500) ±2 V (TDP3500) |
CMRR |
>60 dB at 1 MHz (TDP1500, TDP3500) >25 dB at 1 GHz (TDP1500, TDP3500) |
Input Offset Range |
±7 V (10x or 1x) (TDP1500) ±1 V displayed (TDP3500) |
Operation Voltage Input Range (Common Mode Input Range) |
±7 V (1x) (TDP1500) ±7 V (10x) (TDP1500) +5 V to-4V (TDP3500) |
Noise |
<50 nV/root Hz (TDP1500) 35 nV/root Hz (TDP3500) |
Max Input Voltage (Nondestruct) |
±25 V (DC + pk AC) (TDP1500) ±25 V (DC + pk AC) (TDP3500) |
Propagation Delay |
5.3 ns typical (TDP3500) 5.4 ns typical (TDP1500) |
Physical Characteristics
Dimensionsmmin.
Cable Length*1 |
1200 |
48 |
Weight |
g |
oz. |
Probe Only*1 |
160 |
5.4 |
*1Typical for TDP1500.
Power Requirements
TDP1500 and TDP3500 are powered directly by the DPO7000, DPO4000, and MSO4000 Series Oscilloscopes with TekVPI probe interface.
Recommended Oscilloscopes
DPO7000, DPO4000, MSO4000 Series Oscilloscopes with TekVPI probe interface.
The TDP3500 is fully supported on DPO7000, DPO4000, and MSO4000. The TDP1500 is fully supported on the DPO4000 and MSO4000. TDP1500 functions properly with DPO7000 Series firmware version 4.0.0 and above, but does not provide range control on the oscilloscope menu.
1.5 GHz Differential Probe with TekVPI Interface, Certificate of Traceable Calibration Standard.
3.5 GHz Differential Probe with TekVPI Interface, Certificate of Traceable Calibration Standard.
TDP1500 – Standard Accessories Included
DescriptionQTY ShippedReorder Part No.Reorder QTY
Pouch, Nylon Carrying Case with Inserts |
1 each |
016-1952-xx |
1 each |
Documentation Kit TDP1500, Includes: Printed User Manual (English 071-2209-xx; Japanese 071-2210-xx; Simplified Chinese 071-2211-xx) and a CD containing (Technical Reference Manual PDF English 071-2296-xx) |
1 each Kit |
020-2866-xx (English w/ Standard) |
1 each |
020-2891-xx (Japanese w/ Opt L5) |
1 each |
||
020-2892-xx (Simplified Chinese w/ Opt L7) |
1 each |
||
Certificate of Traceability |
1 each |
Standard w/ Probe |
1 each |
Accessory Kit TDP1500 (see contents listed below, 0 through 10) |
1 each |
020-2702-xx |
1 each |
0) Plastic Accessory Box |
1 each |
006-7164-xx |
|
1) Straight Pins |
8 each |
016-1891-xx |
Pkg of 8 each |
2) Longhorn VIA Adapter |
Pkg of 5 each |
016-1780-xx |
Pkg of 5 each |
3) 1-inch Solder Down |
1 each |
196-3504-xx |
1 each |
4) 3-inch Solder Down |
1 each |
196-3505-xx |
1 each |
5) Y-Lead Adapter |
2 each |
196-3434-xx |
1 each |
6) Micro CKT Test Tip |
3 each |
206-0569-xx |
1 each |
7) Tip Saver |
2 each |
016-1781-xx |
2 each |
8) 3-inch Ground Lead |
2 each |
196-3437-xx |
Pkg of 2 each |
9) Marker Band Set (2 each of 5 colors) |
1 each |
016-1315-xx |
1 each |
10) Accessory Performance Summary and Reorder Sheet |
1 each |
001-1412-xx |
1 each |
TDP3500 – Standard Accessories Included
DescriptionQTY ShippedReorder Part No.Reorder QTY
Pouch, Nylon Carrying Case with Inserts |
1 each |
016-1952-xx |
1 each |
Documentation Kit TDP3500, Includes: Printed User Manual (English 071-2212-xx; Japanese 071-2213-xx; Simplified Chinese 071-2214-xx) and a CD containing (Technical Reference Manual PDF English 071-2297-xx) |
1 each Kit |
020-2867-xx (English w/ Standard) |
1 each |
020-2893-xx (Japanese w/ Opt L5) |
1 each |
||
020-2894-xx (Simplified Chinese w/ Opt L7) |
1 each |
||
Anti-static Wrist Strap |
1 each |
006-3415-xx |
1 each |
Certificate of Traceability |
1 each |
Standard w/ Probe |
1 each |
Accessory Kit TDP3500 (see contents listed below, 1 through 7) |
1 each |
020-2883-xx |
1 each |
0) Plastic Accessory Box |
1 each |
006-7164-xx |
1 each |
1) Variable Spacing Tip Adapter |
Pkg of 4 each |
016-1885-xx |
Pkg of 4 each |
2) Square Pin Adapter |
Pkg of 4 each |
016-1884-xx |
Pkg of 4 each |
3) Y-Lead Adapter |
2 each |
196-3434-xx |
1 each |
4) Micro CKT Test Tip |
3 each |
206-0569-xx |
1 each |
5) 3-inch Ground Lead |
2 each |
196-3469-xx |
Pkg of 2 each |
6) Marker Band Set (2 each of 5 colors) |
1 each |
016-1315-xx |
1 each |
7) Accessory Performance Summary and Reorder Sheet |
1 each |
001-1435-xx |
1 each |
Accessory Kit; Solder-In Differential Probes TDP3500, P6330, P7330, P7350 |
1 each |
020-2505-xx |
1 each |
1) Adapter, Resistor / Wire |
Pkg of 2 each |
016-1926-xx |
Pkg of 2 each |
2) Wire Assembly w/ 0.02 dia |
Pkg of 10 each |
016-1930-xx |
Pkg of 10 each |
3) Wire Assembly w/ 0.008 dia |
Pkg of 10 each |
016-1931-xx |
Pkg of 10 each |
4) 10 Ω Resistor w/ 0.02 dia Wire |
Pkg of 10 each |
016-1927-xx |
Pkg of 10 each |
5) 10 Ω Resistor w/ 0.008 dia Wire |
Pkg of 10 each |
016-1933-xx |
Pkg of 10 each |
6) 20 Ω Resistor w/ 0.02 dia Wire |
Pkg of 10 each |
016-1928-xx |
Pkg of 10 each |
7) 20 Ω Resistor w/ 0.008 dia Wire |
Pkg of 10 each |
016-1934-xx |
Pkg of 10 each |
Optional Accessories
DescriptionTDP1500TDP3500Ordering Part Number (Qty)
BNC to Probe Tip Adapter |
X |
– |
679-4094-xx (set of 1) |
TwinFoot™ Adapter |
X |
X |
016-1785-xx (set of 4) |
TwinTip™ Adapter |
X |
– |
016-1786-xx (set of 4) |
VariTip™ Adapter |
X |
– |
016-1890-xx (set of 8) |
IC Micro Grabber |
X |
X |
013-0309-xx (set of 2) |
Micro KlipChip™ Adapter |
X |
– |
SMK-4 (set of 4) |
IEEE 1394 Adapter |
X |
– |
679-5027-xx (set of 1) |
Short Ground Contact |
X |
– |
016-1783-xx (set of 10) |
Spring-loaded Ground |
X |
– |
016-1782-xx (set of 6) |
Manual Options
OptionDescription
Opt. L0 |
English user instruction manual (Standard). |
Opt. L5 |
Japanese user instruction manual. |
Opt. L7 |
Simplified Chinese instruction manual. |
Service Options
OptionDescription
Opt. C3 |
Calibration Service 3 years |
Opt. C5 |
Calibration Service 5 years |
Opt. D1 |
Calibration Data Report |
Opt. D3 |
Calibration Data Report 3 years (with Opt. C3) |
Opt. D5 |
Calibration Data Report 5 years (with Opt. C5) |
Opt. R3 |
Repair Service 3 years |
Opt. R5 |
Repair Service 5 years |
Opt. CA1 |
Single calibration event, or coverage for the designated calibration interval, whichever comes first |
产品介绍:
Differential active probes provide truer signal reproduction and fidelity for high-frequency measurements. With ultra-low input capacitance and versatile device-under-test connection capabilities, the TDP1500 and TDP3500 Differential-ended Active probes provide excellent high-speed electrical and mechanical performance required for today’s digital system designs.
Specifically designed for use and direct connection to the TekVPI™ probe interface used on the DPO7000, DPO4000, and MSO4000 Series oscilloscopes, the TDP1500 and TDP3500 Differential probes achieve high-speed signal acquisition and measurement fidelity by solving three traditional problems:
技术规格:
CharacteristicDescription
Bandwidth (Probe only) |
≥1.5 GHz warranted (TDP1500) ≥3.5 GHz warranted (TDP3500) |
Attenuation (Probe only) |
1x/10x (TDP1500) 5x (TDP3500) |
Rise Time (Probe only) |
≤265 ps typical (TDP1500) ≤110 ps typical (TDP3500) |
Differential Input Capacitance |
≤1 pF (TDP1500) ≤0.3 pF (TDP3500) |
Differential Input Resistance |
200 k? (TDP1500) 100 k? (TDP3500) |
Differential Input Dynamic Range |
±8.5 V (10x) (TDP1500) ±850 mV (1x) (TDP1500) ±2 V (TDP3500) |
CMRR |
>60 dB at 1 MHz (TDP1500, TDP3500) >25 dB at 1 GHz (TDP1500, TDP3500) |
Input Offset Range |
±7 V (10x or 1x) (TDP1500) ±1 V displayed (TDP3500) |
Operation Voltage Input Range (Common Mode Input Range) |
±7 V (1x) (TDP1500) ±7 V (10x) (TDP1500) +5 V to-4V (TDP3500) |
Noise |
<50 nV/root Hz (TDP1500) 35 nV/root Hz (TDP3500) |
Max Input Voltage (Nondestruct) |
±25 V (DC + pk AC) (TDP1500) ±25 V (DC + pk AC) (TDP3500) |
Propagation Delay |
5.3 ns typical (TDP3500) 5.4 ns typical (TDP1500) |
Physical Characteristics
Dimensionsmmin.
Cable Length*1 |
1200 |
48 |
Weight |
g |
oz. |
Probe Only*1 |
160 |
5.4 |
*1Typical for TDP1500.
Power Requirements
TDP1500 and TDP3500 are powered directly by the DPO7000, DPO4000, and MSO4000 Series Oscilloscopes with TekVPI probe interface.
Recommended Oscilloscopes
DPO7000, DPO4000, MSO4000 Series Oscilloscopes with TekVPI probe interface.
The TDP3500 is fully supported on DPO7000, DPO4000, and MSO4000. The TDP1500 is fully supported on the DPO4000 and MSO4000. TDP1500 functions properly with DPO7000 Series firmware version 4.0.0 and above, but does not provide range control on the oscilloscope menu.
1.5 GHz Differential Probe with TekVPI Interface, Certificate of Traceable Calibration Standard.
3.5 GHz Differential Probe with TekVPI Interface, Certificate of Traceable Calibration Standard.
TDP1500 – Standard Accessories Included
DescriptionQTY ShippedReorder Part No.Reorder QTY
Pouch, Nylon Carrying Case with Inserts |
1 each |
016-1952-xx |
1 each |
Documentation Kit TDP1500, Includes: Printed User Manual (English 071-2209-xx; Japanese 071-2210-xx; Simplified Chinese 071-2211-xx) and a CD containing (Technical Reference Manual PDF English 071-2296-xx) |
1 each Kit |
020-2866-xx (English w/ Standard) |
1 each |
020-2891-xx (Japanese w/ Opt L5) |
1 each |
||
020-2892-xx (Simplified Chinese w/ Opt L7) |
1 each |
||
Certificate of Traceability |
1 each |
Standard w/ Probe |
1 each |
Accessory Kit TDP1500 (see contents listed below, 0 through 10) |
1 each |
020-2702-xx |
1 each |
0) Plastic Accessory Box |
1 each |
006-7164-xx |
|
1) Straight Pins |
8 each |
016-1891-xx |
Pkg of 8 each |
2) Longhorn VIA Adapter |
Pkg of 5 each |
016-1780-xx |
Pkg of 5 each |
3) 1-inch Solder Down |
1 each |
196-3504-xx |
1 each |
4) 3-inch Solder Down |
1 each |
196-3505-xx |
1 each |
5) Y-Lead Adapter |
2 each |
196-3434-xx |
1 each |
6) Micro CKT Test Tip |
3 each |
206-0569-xx |
1 each |
7) Tip Saver |
2 each |
016-1781-xx |
2 each |
8) 3-inch Ground Lead |
2 each |
196-3437-xx |
Pkg of 2 each |
9) Marker Band Set (2 each of 5 colors) |
1 each |
016-1315-xx |
1 each |
10) Accessory Performance Summary and Reorder Sheet |
1 each |
001-1412-xx |
1 each |
TDP3500 – Standard Accessories Included
DescriptionQTY ShippedReorder Part No.Reorder QTY
Pouch, Nylon Carrying Case with Inserts |
1 each |
016-1952-xx |
1 each |
Documentation Kit TDP3500, Includes: Printed User Manual (English 071-2212-xx; Japanese 071-2213-xx; Simplified Chinese 071-2214-xx) and a CD containing (Technical Reference Manual PDF English 071-2297-xx) |
1 each Kit |
020-2867-xx (English w/ Standard) |
1 each |
020-2893-xx (Japanese w/ Opt L5) |
1 each |
||
020-2894-xx (Simplified Chinese w/ Opt L7) |
1 each |
||
Anti-static Wrist Strap |
1 each |
006-3415-xx |
1 each |
Certificate of Traceability |
1 each |
Standard w/ Probe |
1 each |
Accessory Kit TDP3500 (see contents listed below, 1 through 7) |
1 each |
020-2883-xx |
1 each |
0) Plastic Accessory Box |
1 each |
006-7164-xx |
1 each |
1) Variable Spacing Tip Adapter |
Pkg of 4 each |
016-1885-xx |
Pkg of 4 each |
2) Square Pin Adapter |
Pkg of 4 each |
016-1884-xx |
Pkg of 4 each |
3) Y-Lead Adapter |
2 each |
196-3434-xx |
1 each |
4) Micro CKT Test Tip |
3 each |
206-0569-xx |
1 each |
5) 3-inch Ground Lead |
2 each |
196-3469-xx |
Pkg of 2 each |
6) Marker Band Set (2 each of 5 colors) |
1 each |
016-1315-xx |
1 each |
7) Accessory Performance Summary and Reorder Sheet |
1 each |
001-1435-xx |
1 each |
Accessory Kit; Solder-In Differential Probes TDP3500, P6330, P7330, P7350 |
1 each |
020-2505-xx |
1 each |
1) Adapter, Resistor / Wire |
Pkg of 2 each |
016-1926-xx |
Pkg of 2 each |
2) Wire Assembly w/ 0.02 dia |
Pkg of 10 each |
016-1930-xx |
Pkg of 10 each |
3) Wire Assembly w/ 0.008 dia |
Pkg of 10 each |
016-1931-xx |
Pkg of 10 each |
4) 10 Ω Resistor w/ 0.02 dia Wire |
Pkg of 10 each |
016-1927-xx |
Pkg of 10 each |
5) 10 Ω Resistor w/ 0.008 dia Wire |
Pkg of 10 each |
016-1933-xx |
Pkg of 10 each |
6) 20 Ω Resistor w/ 0.02 dia Wire |
Pkg of 10 each |
016-1928-xx |
Pkg of 10 each |
7) 20 Ω Resistor w/ 0.008 dia Wire |
Pkg of 10 each |
016-1934-xx |
Pkg of 10 each |
Optional Accessories
DescriptionTDP1500TDP3500Ordering Part Number (Qty)
BNC to Probe Tip Adapter |
X |
– |
679-4094-xx (set of 1) |
TwinFoot™ Adapter |
X |
X |
016-1785-xx (set of 4) |
TwinTip™ Adapter |
X |
– |
016-1786-xx (set of 4) |
VariTip™ Adapter |
X |
– |
016-1890-xx (set of 8) |
IC Micro Grabber |
X |
X |
013-0309-xx (set of 2) |
Micro KlipChip™ Adapter |
X |
– |
SMK-4 (set of 4) |
IEEE 1394 Adapter |
X |
– |
679-5027-xx (set of 1) |
Short Ground Contact |
X |
– |
016-1783-xx (set of 10) |
Spring-loaded Ground |
X |
– |
016-1782-xx (set of 6) |
Manual Options
OptionDescription
Opt. L0 |
English user instruction manual (Standard). |
Opt. L5 |
Japanese user instruction manual. |
Opt. L7 |
Simplified Chinese instruction manual. |
Service Options
OptionDescription
Opt. C3 |
Calibration Service 3 years |
Opt. C5 |
Calibration Service 5 years |
Opt. D1 |
Calibration Data Report |
Opt. D3 |
Calibration Data Report 3 years (with Opt. C3) |
Opt. D5 |
Calibration Data Report 5 years (with Opt. C5) |
Opt. R3 |
Repair Service 3 years |
Opt. R5 |
Repair Service 5 years |
Opt. CA1 |
Single calibration event, or coverage for the designated calibration interval, whichever comes first |
Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有 [粤ICP备14101712号-1] [法律顾问]
公司地址:广东省深圳市南山区西丽街道官龙村华纵科技楼5楼 邮编:518055
在线QQ服务: 服务热线:0755-86016691 电话:13715327187 传真:0755-86641139-816
E-mail:info@wl95.com