泰克提供了一系列高压探测解决方案，使用户能够安全，准确地进行浮动测量。
THDP0100和P5210A具有泰克提供的最大差分动态范围功能，使用户能够安全地测量高达±6000 V的电压。THDP0100支持高达100 MHz的带宽，并以1/1000的增益压摆率高达2500 V / ns。这些探头配有两种尺寸的钩尖，并具有超范围的视觉和听觉指示器，当它们超出探头的线性范围时，会向用户发出警告。
THDP0200和P5205A是有源差分探头，能够安全地测量高达±1500 V的差分电压。这些探头可有效地在IGBT电路（例如，电动机驱动器和电源转换器）中进行测量。THDP0200在1/500增益下支持高达200 MHz的带宽和高达650 V / ns的压摆率。
TMDP0200和P5202A专为差分要求高达±750 V的中压应用而设计。这些探头的衰减范围较小，信噪比更高。
P5200A可以与任何示波器一起使用，并使用户可以在示波器接地的情况下安全地测量浮动电路。P5200A有源差分探头将浮动信号转换为低压接地参考信号，可以在任何接地参考示波器上安全，轻松地显示这些信号。
警告：为安全操作，请勿将P5200A高压差分探头与具有浮动输入（隔离输入）的示波器一起使用，例如Tektronix TPS2000和THS3000系列示波器。P5200A高压差分探头需要具有接地输入的示波器或其他测量仪器。的TMDP和THDP系列探针配置有TekVPI ®接口，其允许示波器和探针之间智能通信。按下探头菜单按钮将启动示波器显示屏上的探头控制菜单，从而可以访问所有相关的探头设置和控件。这些探头的设计上的TekVPI操作®而不需要TPA-BNC适配器示波器。
所述P52xxA系列探头配有泰克的TekProbe ®接口，其通信尺度信息到示波器。直接连接可以被制成具有TekProbe配置示波器®与1103的TekProbe使用时接口或任何示波器®电源。
Tektronix offers a broad portfolio of high-voltage probing solutions that enable users to safely and accurately make floating measurements.
The THDP0100 and P5210A have the largest differential dynamic range capability from Tektronix, allowing users to safely measure up to ±6000 V. The THDP0100 supports bandwidths up to 100 MHz and slew rates up to 2500 V/ns at 1/1000 gain. These probes are supplied with two sizes of hook tips and have an overrange visual and audible indicator which warns the user when they are exceeding the linear range of the probe.
The THDP0200 and P5205A are active differential probes that are capable of safely measuring differential voltages up to ±1500 V. The probes are effective in making measurements in IGBT circuits such as motor drives and power converters. The THDP0200 supports bandwidths up to 200 MHz and slew rates up to 650 V/ns at 1/500 gain.
The TMDP0200 and P5202A are designed for medium-voltage applications with differential requirements up to ±750 V. These probes have lower attenuation ranges and offer better signal-to-noise ratio.
The P5200A can be used with any oscilloscope and enables users to safely make measurements of floating circuits with their oscilloscope grounded. The P5200A Active Differential Probe converts floating signals to low-voltage ground-referenced signals that can be displayed safely and easily on any ground-referenced oscilloscope.
Warning: For safe operation, do not use the P5200A High-voltage Differential Probe with oscilloscopes that have floating inputs (isolated inputs), such as the Tektronix TPS2000 and THS3000 Series oscilloscopes. The P5200A High-voltage Differential Probe requires an oscilloscope or other measurement instrument with grounded inputs.The TMDP and THDP Series probes are equipped with the TekVPI®interface which allows smart communication between the oscilloscope and probe. Pushing the probe menu button will launch the probe control menu on the oscilloscope display providing access to all relevant probe settings and controls. These probes are designed to operate on TekVPI®oscilloscopes without requiring the TPA-BNC adapter.
The P52xxA Series probes are equipped with the Tektronix TekProbe®interface which communicates scale information to the oscilloscope. Direct connections can be made to oscilloscopes configured with the TekProbe®interface or to any oscilloscope when used with the 1103 TekProbe®Power Supply.
Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有 [粤ICP备14101712号-1] [法律顾问]
公司地址：广东省深圳市南山区西丽街道官龙村华纵科技楼5楼 邮编：518055
在线QQ服务：
服务热线：0755－86016691 电话：13715327187 传真：0755-86641139-816
E-mail：info@wl95.com
