浏览次数:1369
选件 | 是否计量 | 发货周期 | 保修时间 | 成色 |
---|---|---|---|---|
否 | 1-4周 | 12- | 8成新 | |
所在地 | 机身号 | 状态 | 资料下载 | |
深圳市 | 完好 |
9100型是单/双通道,2U,半机架尺寸的台式功率放大器,设计用于信号放大。9100型具有前所未有的信号纯度,可将直流信号放大到500kHz以上。该单元具有固定的x15增益,但是同一放大器可提供定制增益,并且不会造成信号纯度或性能下降。
主要特征:
9100型可作为波形,函数或脉冲发生器发出的信号的放大缓冲器。这些发生器中的大多数将产生限制为20Vp-p的信号转换为高阻抗。9100型可以将这些电压转换为高达300Vp-p的电压。该放大器的电流驱动能力从0.1Ω起为±150mA。资源。虽然输出可以驱动较小的电容性或电感性负载,但对于全高速电势,建议负载特性应主要为电阻性的。9100型可以承受高达0.01µF和0.5 mH的负载电容和电感,而不会导致性能下降。
先进的功率放大器带有浮动输入和输出连接器,可从最高250VDC的地电平浮动。唯一的限制是输入和输出接地都必须连接到同一电平。在放大设备必须与其信号源位于同一地面的应用中,此功能极为重要。浮动功能可以使用简单的,用户可访问的跳线连接来添加或删除。
放大器外壳设计为堆叠在其他Tabor产品的顶部或下方。它也可以与Tabor发生器并排安装在标准的19英寸机架中。波形放大器组合是几乎任何高压,宽带应用的理想解决方案。
9100型功率放大器是Tabor的高性价比解决方案的又一个解决方案,适用于各种高压应用。
Model 9100 is a Single/Dual Channel, 2U, half-rack size, bench-top power amplifier designed for signal amplification. With unprecedented signal purity, Model 9100 amplifies signals from DC to over 500kHz. The unit has a fixed gain of x15 however the same amplifier is available with custom gain and no signal purity or performance degradation whatsoever.
Main features:
Model 9100 operates as an amplifying buffer for signals emitted from waveform, function, or pulse generators. Most of these generators produce signals limited to 20Vp-p into high impedance. Model 9100 can convert these voltages to levels as high as 300Vp-p. The amplifier has a current driving capability of ±150mA from a 0.1? source. While the output can drive small capacitive or inductive loads, for full high speed potential it is recommended that the load characteristics should be mainly resistive. Model 9100 can withstand load capacitance and inductance up to 0.01µF and 0.5 mH without any performance deterioration.
The advanced power amplifier is supplied with floating input and output connectors allowing flotation from ground level up to 250VDC. The only limitation is that both the input and output grounds must connect to the same level. This capability is extremely important in applications where the amplifying device must reside on the same ground level as its source. The floating capability can be added or removed using a simple, user-accessible, jumper connection.
The amplifier case was designed to stack on top or below other Tabor products. It can also be mounted alongside a Tabor generator in a standard 19" rack. The waveform-amplifier combo is an ideal solution for virtually any high-voltage, wide bandwidth application.
Model 9100 power amplifier is yet another of Tabor`s cost-effective solutions for a full range of high voltage applications.
Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有 [粤ICP备14101712号-1] [法律顾问]
公司地址:广东省深圳市南山区西丽街道官龙村华纵科技楼5楼 邮编:518055
在线QQ服务: 服务热线:0755-86016691 电话:13715327187 传真:0755-86641139-816
E-mail:info@wl95.com