您好 欢迎来到晧辰科技!    [登录] [注册]
新闻动态全新仪器资讯论坛
快捷发布产品促销资料中心

所有设备分类

新闻动态

促销信息

产品详情

销售横河 AQ6370C 光谱分析仪

浏览次数:804

晧辰自营,品质保证,配送快捷

产品参数

选件 是否计量 发货周期 保修时间 成色
1-4天 12- 8成新
所在地 机身号 状态 资料下载
深圳市 完好
更新日期:2024-03-20
联系电话:0755-86016691

* 产品描述

描述:

AQ6370C是横河电机的光学分析仪。光谱分析仪,也称为光学分析仪,是一种测量光源功率的精密仪器。该电子测试设备用于监视指定波长范围内的功率分配。它在图形中显示测量值,其中功率是垂直刻度,波长是水平刻度。


附加功能:

  • 波长范围:600至1700nm
  • 高波长精度:±0.01nm
  • 高波长分辨率:0.02nm
  • 宽动态范围:典型值为78dB。
  • 宽电平范围:+20至-90dBm
  • 快速测量:0.2秒。(100nm跨度)
  • 适用于单模和多模光纤

标准和高性能模型

有两种型号,标准和高性能。高性能模型可提供更高的波长精度和动态范围。高波长分辨率:0.02nm

技术指标

  • 高波长精度:±0.01nm
  • 高性能型号:±0.01nm(C波段)
  • 标准型号:±0.02nm(C + L波段)

波长范围

标准(-10)

  • 1520至1580 nm:±0.02 nm 
  • 1580至1620 nm:±0.02 nm
  • 1450至1520 nm:±0.04 nm
  • 全范围:±0.1 nm

高性能(-20)

  • 1520至1580 nm:±0.01 nm
  • 1580至1620 nm:±0.02 nm
  • 1450至1520 nm:±0.04 nm
  • 全范围:±0.1 nm

超高动态范围:典型值78dB。

  • 通过减少单色仪中的杂散光,AQ6370C实现了典型的超高动态范围。78分贝。

标准(-10)

  • 峰值±1.0 nm:73 dB
  • 峰值±0.4 nm:62 dB
  • 峰值±0.2 nm:45 dB

高性能(-20)

  • 峰值±1.0 nm:73 dB(典型值78dB)
  • 峰值±0.4 nm:64 dB(典型值70dB)
  • 峰值±0.2 nm:50 dB(典型值55dB)

滤镜边缘更清晰

高性能模型还可以在峰值波长的0.2nm范围内实现更高的动态范围。借助单色仪更清晰的光谱特性,可以清晰地分离并精确测量附近的光谱信号。

标准(-10)

  • 峰值±0.2 nm:55 dB
  • 峰值±0.1 nm:37 dB

高性能(-20)

  • 峰值±0.2 nm:58 dB(典型值60dB)
  • 峰值±0.1 nm:45 dB(典型值50dB)

杂散光抑制比:典型值80dB。 

当不使用通常需要较长测量时间的高动态模式时,此新规范提供了杂散光抑制功能。AQ6370C具有高杂散光抑制比,有助于缩短测量时间。

  • 标准(AQ6370C-10):73dB
  • 高性能(AQ6370C-20):76dB(典型值80dB)

宽电平范围:+ 20DBm至-90dBm

AQ6370C可以测量高功率源,例如拉曼放大器的光放大器和泵浦激光器,以及非常弱的光信号。根据测试应用和测量速度要求,可以从七个类别中选择测量灵敏度。

  • 改进的电平灵敏度:-85dBm(1000至1300nm)
  • 平滑功能-减少测量频谱上的噪声
  • 高动态模式-通过减少杂散光的影响来获得更好的动态范围,杂散光的影响是在输入为强光信号时引起的。

自由空间输入

  • 同一OSA上的多模和单模光纤:AQ6370C对多模光纤的低插入损耗也有利于保持出色的测量效率
  • 输入连接器的插入损耗变化小,可提高测量的可重复性
  • 由于没有物理接触,所以不会损坏连接光纤
  • APC水平校正
  • APC电平校正功能校正由倾斜PC连接器的插入损耗引起的电平偏移

出色的效率

  • 快速扫描:0.2sec./100nm

AQ6370C具有先进的单色仪,更快的电路和降噪技术,即使从DFB-LD或DWDM信号测量陡峭光谱,或从宽带光源测量低功率信号,也能实现快速测量速度。

  • 快速远程接口(以太网,GP-IB)

宽扫宽而高分辨率

50001个数据采样点可在一次扫描中扩展测量范围,同时保持较高的波长分辨率。与常规系统相比,这使您的测量更轻松,更高效。

操作简便

轨迹缩放

  • 通过单击并拖动鼠标来更改显示条件,例如中心波长和跨度
  • 立即扩大您的兴趣范围并随意移动

鼠标和键盘操作

  • 我们的许多用户证明前面板操作直观且易于使用
  • 鼠标更轻松
  • 键盘帮助输入标签和文件名

简易数据处理

  • USB存储:USB接口支持大容量可移动内存和硬盘驱动器。
  • 512MB内部存储器,可记录超过20,000条迹线
  • 一次性跟踪归档:所有七个跟踪可以一次保存在一个文件中。

各种分析功能

7条单独痕迹

  • 同时显示多迹线
  • 迹线之间的计算(迹线之间的减法)
  • 最大/最小保持

13种常用分析的光谱分析功能,例如:

  • 光谱宽度分析
  • WDM(OSNR)分析
  • WDM-NF(EDFA)分析
  • DFB-LD分析
  • FP-LD分析
  • LED分析
  • SMSR分析
  • 各种过滤器分析
  • 通过宏编程,可以将多个分析合并并自动执行。

建立自动化测试系统

宏编程

  • 无需外部控制器即可构建简单的自动测量系统。
  • 通过记录用户的实际按键和参数选择,易于创建测试程序。

快速远程接口

  • GP-IB,RS-232和以太网(10 / 100Base-T)接口
  • 快速的测量,命令处理和数据传输速度可提高测试系统的测试吞吐量。
  • SCPI兼容命令和AQ6317仿真模式
  • LabVIEW®驱动程序可用

易于保持准确

对光学精密产品(如光谱分析仪)的环境条件变化,振动和冲击会影响光学组件,并最终降低光学性能。使用标准功能,AQ6370C可以在几分钟内保持其高光学性能,因此您可以快速开始测量。

  • 内置波长参考源:AQ6370C配备了用于波长校准和光学对准的波长参考源。
  • 波长校准功能:使用内置波长参考或外部光源自动校准,以确保波长精度。
  • 光学对准功能:使用内置光源自动对准单色仪中的光路,以保持高性能。

AQ6370C的整体高性能不仅可以涵盖光学设备和光学传输系统的制造,而且还可以进行研发以及多种其他应用:

  • 光学有源设备
  • 激光二极管/光纤激光器/光放大器/光收发器
  • 光学无源设备
  • 滤波器/ FBG / AWG / WSS / ROADM /光纤
  • 光学传输设备(DWDM,CWDM)
  • 应用光子学设备的开发支持

详细信息

The AQ6370C is an optical analyzer from Yokogawa. An optical spectrum analyzer, also called an optical analyzer, is a precision instrument that measures the power of an optical source. This electronic test equipment is for monitoring power distribution over a specified wavelength span. It displays the measurement in a graph, where power is the vertical scale and wavelength is the horizontal scale.


Additional Features:

  • Wavelength range: 600 to 1700nm
  • High wavelength accuracy: ±0.01nm
  • High wavelength resolution: 0.02nm
  • Wide dynamic range: 78dB typ.
  • Wide level range: +20 to -90dBm
  • Fast measurement: 0.2 sec. (100nm span)
  • Applicable to single-mode and multimode fibers

Standard and High-Performance Models

There are two models available, Standard and High performance. The High-Performance model provides even higher wavelength accuracy and dynamic range. High wavelength resolution: 0.02nm

Specifications

  • High Wavelength Accuracy: ±0.01nm
  • High performance model: ±0.01nm (C band)
  • Standard model: ±0.02nm (C+L band)

Wavelength Range

Standard (-10)

  • 1520 to 1580 nm: ±0.02 nm 
  • 1580 to 1620 nm: ±0.02 nm
  • 1450 to 1520 nm: ±0.04 nm
  • Full range: ±0.1 nm

High Performance (-20)

  • 1520 to 1580 nm: ±0.01 nm
  • 1580 to 1620 nm: ±0.02 nm
  • 1450 to 1520 nm: ±0.04 nm
  • Full range: ±0.1 nm

Ultra-High Dynamic Range: 78dB typ.

  • With the reduced stray-light in the monochromator, AQ6370C achieves ultra-high dynamic range of typ. 78dB.

Standard (-10)

  • Peak± 1.0 nm: 73 dB
  • Peak± 0.4 nm: 62 dB
  • Peak± 0.2 nm: 45 dB

High Performance (-20)

  • Peak± 1.0 nm: 73 dB (Typ.78dB)
  • Peak± 0.4 nm: 64 dB (Typ.70dB)
  • Peak± 0.2 nm: 50 dB (Typ.55dB)

Sharper Filter Edge

The high-performance model can also achieve a higher dynamic range within 0.2nm of the peak wavelength. With the sharper spectral characteristics of the monochromator, spectral signals in close proximity can be separated clearly and measured accurately.

Standard (-10)

  • Peak± 0.2 nm: 55 dB
  • Peak± 0.1 nm: 37 dB

High Performance (-20)

  • Peak± 0.2 nm: 58 dB (Typ.60dB)
  • Peak± 0.1 nm: 45 dB (Typ.50dB)

Stray-light suppression ratio: 80dB typ. 

This new specification provides stray-light suppression capability when High dynamic mode, usually taking longer measurement time, is not used. The AQ6370C contributes to shortening the measurement time with the high stray light suppression ratio.

  • Standard (AQ6370C-10): 73dB
  • High Performance (AQ6370C-20): 76dB (Typ. 80dB)

Wide Level Range: +20DBm to -90dBm

The AQ6370C can measure high power sources such as optical amplifiers and pump lasers for Raman amplifiers, and very weak optical signals as well. Measurement sensitivity can be chosen from seven categories according to test applications and measurement speed requirements.

  • Improved level sensitivity: -85dBm (1000 to 1300nm)
  • Smoothing Function - Reduce noise on the measured spectrum
  • High dynamic mode - Obtain a better dynamic range by reducing the influence of stray-light, which is caused when the input is a strong optical signal.

Free Space Input

  • Multimode and single mode fiber on the same OSA: AQ6370C's low insertion loss for multimode fiber is also beneficial to maintain the excellent measurement efficiency
  • Small insertion loss variation at the input connector increases measurement repeatability
  • No damage connecting fibers because there is no physical contact
  • APC level correction
  • The APC level correction function corrects the level offset caused by an insertion loss of angled PC connector

Excellent Efficiency

  • Fast Sweep: 0.2sec./100nm

With an advanced monochromator, faster electrical circuits, and noise reduction techniques, the AQ6370C achieves fast measurement speed even when measuring a steep spectrum from DFB-LD or DWDM signals, or when measuring a low power signal from a broadband light source.

  • Fast Remote Interface (Ethernet, GP-IB)

Wide Span Sweep yet High Resolution

The 50,001 data sampling points expands measurement range in a single sweep while keeping a high wavelength resolution. This makes your measurement easier and more efficient than conventional systems.

Easy Operation

Trace Zooming

  • Change display conditions, such as center wavelength and span, by clicking and dragging the mouse
  • Enlarge your area of interest instantly and move it at will

Mouse & Keyboard Operation

  • Front panel operation proven intuitive and easy to use by our many of users
  • Even easier with a mouse
  • The keyboard helps enter labels and file names

Easy Data Handling

  • USB Storage: USB interfaces support large-capacity removable memory and hard disk drives.
  • 512MB Internal Memory for over 20,000 traces
  • All-at-Once Trace Filing: All seven traces can be saved in one file at once.

Various Analysis Functions

7 Individual Traces

  • Simultaneous multi-trace display
  • Calculation between traces (subtraction between traces)
  • Max/Min hold

13 Spectral Analysis Functions for popular applications, such as:

  • Spectral width analysis
  • WDM (OSNR) analysis
  • WDM-NF (EDFA) analysis
  • DFB-LD analysis
  • FP-LD analysis
  • LED analysis
  • SMSR analysis
  • Various filter analysis
  • With the macro programming, multiple analyses can be combined and executed automatically.

Building Automated Test System

Macro Programming

  • Build a simple auto-measurement system without an external controller.
  • Easy to create test program by recording the user's actual key strokes and parameter selections.

Fast Remote Interfaces

  • GP-IB, RS-232, and Ethernet (10/100Base-T) interfaces
  • Improve the testing throughput of test systems by the fast measurement, command processing, and data transfer speed.
  • SCPI compatible commands and AQ6317 Emulation Mode
  • LabVIEW® Driver available

Easy to Keep Accurate

Ambient condition change, vibration and shock to an optical precision product, like an optical spectrum analyzer, will affect the optical components, and eventually degrade optical performance. Using standard functions, AQ6370C can maintain its high optical performance within a couple of minutes so that you can quickly start a measurement.

  • Built-in wavelength reference source: AQ6370C comes equipped with a wavelength reference source for the wavelength calibration and optical alignment.
  • Wavelength calibration function: Automatically calibrates with the built-in wavelength reference or an external light source, to ensure the wavelength accuracy.
  • Optical alignment function: Automatically aligns the optical path in the monochromator using the built-in source to maintain high performance.

AQ6370C's overall high performance can cover not only manufacturing of optical devices and optical transmission systems but also research and development, and a variety of other applications:

  • Optical active devices
  • Laser diode/Fiber laser/Optical amplifier/Optical transceiver
  • Optical passive devices
  • Filter/FBG/AWG/WSS/ROADM/Optical fiber
  • Optical transmission equipment (DWDM, CWDM)
  • Development support of Applied photonics equipment

同类热门仪器

友情推荐

合作客户:

查看更多>>

国产仪器:

查看更多>>

进口仪器:

查看更多>>

校准计量:

查看更多>>

Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有  [粤ICP备14101712号-1] [法律顾问]

公司地址:广东省深圳市南山区西丽街道官龙村华纵科技楼5楼  邮编:518055

在线QQ服务:  服务热线:0755-86016691  电话:13715327187  传真:0755-86641139-816

E-mail:info@wl95.com