浏览次数:792
选件 | 是否计量 | 发货周期 | 保修时间 | 成色 |
---|---|---|---|---|
否 | 7天 | 90- | 9成新 | |
所在地 | 机身号 | 状态 | 资料下载 | |
深圳市 | 完好 |
Features
Sensor, sensor unit
●High accuracylow polarization dependence of 0.02dBp-p or less.
Light source unit
●High stability
The LD unit has an internal isolator that maintain
optical output level stability at ±0.003dB.
●Optical power attenuation function
Optical power can be decreased in 0.1dB steps to
6.0dB.
●Support for a variety of connectors
A wide variety of optical connectors can be used just
be exchanging the universal and connector adapters
(AQ4214 excluded).
Return loss unit
●High accuracy
Because internal self-reflectance data is stored by
individual units in memory to correct operations,
even high-reflectance attenuation can be measured
with excellent accuracy.
●High stability
The internal high-stability sensor can be used
together with the LD unit to provide stable reflectance
attenuation measurement.
●Simple operation
Mounted with a return loss unit and LD unit, the
display will show reflectance attenuation after
measurement of reference reflectance by merely
disconnecting the measured fiber cable.
Main frame
Sensor unit
●High-speed measurement
The minimum measurement interval is 10ms (single
sensor unit), improving efficiency by slashing
measurement time.
●Precise wavelength correction settings
Sensor wavelength sensitivity can be set in 1nm
steps.
●Supports three relative measurement
Measurement can be referenced to measured values
as in existing systems, or be based on a comparison
with data from other channels, or against preset
inputs.
●Selectable display resolution
Display resolution can be set to 0.1, 0.01 or 0.001,
improving reading efficiency by providing the
resolution needed for your specific application.
●Connection to external unit
By connecting extensional frame for Optical
Multimeter AQ2141, unit of up to 16 external
channels can be used. (Possible connection unit:
select one unit from Sensor unit, OPM unit, Light
source unit.)
●Data storage function
The main frame can store up to 1000 data points per
channel, or 2000 total, and user-selected data can
be output through the GP-IB interface.
●Data display function
Manual operation can be used to check not only
individual data in memory, but also maximum,
minimum and average values.
●Measurement condition set-up function
Up to ten sets of measurement conditions can be
stored for each channel and read out as required.
One set must be defined as default for each channel.
AQ2140主机参数:
AQ2732模块参数:
AQ4215(131)模块参数:
Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有 [粤ICP备14101712号-1] [法律顾问]
公司地址:广东省深圳市南山区西丽街道官龙村华纵科技楼5楼 邮编:518055
在线QQ服务: 服务热线:0755-86016691 电话:13715327187 传真:0755-86641139-816
E-mail:info@wl95.com